BEST SELLING CUDY SWITCH PRICELIST
Cudy GS1005P 5 Port Switch
- Brand: Cudy
- Model No: Cudy GS1005P Unmanaged Switch
- Gigabit RJ45 Ports: 5
- Gigabit RJ45 PoE Ports: #1~#4
- Max Power on a Single PoE Port: 30W
- PoE Port Notes: The PoE ports comply with IEEE 802.3at/af standards.
- PoE Priority: Intelligent Power Management- Automatically disconnect the lastly powered device when power exceeds budget.
- Shielded RJ45 Port: True
- Extend Mode Ports: #1~#4
- VLAN Mode Ports: #1~#4
- LED: Power, PoE Status of Each PoE Port, Link/ACT of Each Ethernet Port, PoE Max Status
- Power Interfaces: DC Jack
- Physical Buttons: VLAN/Default/Extend DIP Switch, PoE Watchdog On/Off
- Physical Buttons Note: The PoE Watchdog will attempt to reboot the plugged-in clients that have been inactive for 5 minutes. Do not turn it on for clients with online auto-upgrade feature.
- Copper Speed and Distance: Cat. 3 or higher cable: 100 meters at 10 Mbps, Cat. 5 or higher cable: 100 meters at 100 Mbps, Cat. 5e or higher cable: 100 meters at Gigabit, Cat. 5e or higher cable: 250 meters at 10 Mbps
- Copper Speed and Distance Note: 250-meter transmission is only available on the Extend Mode ports when the Extend Mode is activated.
- MAC Address Table: 2048
- Max Switching Capacity: 10 Gbps
- Max Forwarding Rate: 7.44 Mpps
- Jumbo Frame: 15 KB
- Packet Buffer: 3 Mbit
- Power Methods: DC
- Power Input: 54V?1.11A
- Power Adapter in the Box: Input: 100-240V~, 50/60Hz, Output: 52V?1.11A
- Power Supply: 60W
- Max Power Excluding PoE: 5W
- 802.3 Protocols: 802.3i 10BASE-T, 802.3u 100BASE-TX, 802.3ab 1000BASE-T, 802.3x Flow Control, 802.3af PoE, 802.3at PoE
- PoE Management: Intelligent Power Management
- Grounding Methods: Three-Prong Plug
- Operating Temperature: 0~40 ? (32~104 ?)
- Storage Temperature: -40~70? (-40~158 ?)
- Operating Humidity: 10~90% non-condensing
- Storage Humidity: 10~95% non-condensing
- Dimension: 119×85×28 mm, 4.69×3.35×1.1 inches
- Weight: 253.0 g (8.92 oz.)
- Casing Material: Metal
- Installation: Desktop, Wall-mount
Cudy GS105P 5 Port Switch
- Brand: Cudy
- Model No: Cudy GS105P Unmanaged Switch
- Gigabit RJ45 Ports: 5
- Gigabit RJ45 PoE Ports: #1~#4
- Max Power on a Single PoE Port: 30W
- PoE Port Notes: The PoE ports comply with IEEE 802.3at/af standards.
- PoE Priority: Intelligent Power Management- Automatically disconnect the lastly powered device when power exceeds budget.
- Shielded RJ45 Port: True
- Extend Mode Ports: #1~#4
- VLAN Mode Ports: #1~#4
- LED: Power, PoE Status of Each PoE Port, Link/ACT of Each Ethernet Port, PoE Max Status
- Power Interfaces: DC Jack
- Physical Buttons: VLAN/Default/Extend DIP Switch, PoE Watchdog On/Off
- Physical Buttons Note: The PoE Watchdog will attempt to reboot the plugged-in clients that have been inactive for 5 minutes. Do not turn it on for clients with online auto-upgrade feature.
- Copper Speed and Distance: Cat. 3 or higher cable: 100 meters at 10 Mbps, Cat. 5 or higher cable: 100 meters at 100 Mbps, Cat. 5e or higher cable: 100 meters at Gigabit, Cat. 5e or higher cable: 250 meters at 10 Mbps
- Copper Speed and Distance Note: 250-meter transmission is only available on the Extend Mode ports when the Extend Mode is activated.
- MAC Address Table: 2048
- Max Switching Capacity: 10 Gbps
- Max Forwarding Rate: 7.44 Mpps
- Jumbo Frame: 15 KB
- Packet Buffer: 3 Mbit
- Power Methods: DC
- Power Input: 54V?0.66A
- Power Adapter in the Box: Input: 100-240V~, 50/60Hz, Output: 54V?0.66A
- Power Supply: 36W
- Max Power Excluding PoE: 4W
- 802.3 Protocols: 802.3i 10BASE-T, 802.3u 100BASE-TX, 802.3ab 1000BASE-T, 802.3x Flow Control, 802.3af PoE, 802.3at PoE
- PoE Management: Intelligent Power Management
- Grounding Methods: Three-Prong Plug
- Operating Temperature: 0~40 ? (32~104 ?)
- Storage Temperature: -40~70? (-40~158 ?)
- Operating Humidity: 10~90% non-condensing
- Storage Humidity: 10~95% non-condensing
- Dimension: 119×85×28 mm, 4.69×3.35×1.1 inches
- Weight: 253.6 g (8.95 oz.)
- Casing Material: Metal
- Installation: Desktop, Wall-mount
Cudy HS108ES1 8 Port Switch
- Brand: Cudy
- Model No: Cudy HS108ES1 Managed Switch
- 10G SFP+ Slots: 1
- 2.5G RJ45 Ports: 8
- Ethernet Notes: SFP+ supports 10G/2.5G/1G speeds.
- Shielded RJ45 Port: True
- Extend Mode Ports: Configurable
- VLAN Mode Ports: Configurable
- LED: Power, Speed/Link/Act of Each Ethernet Port (2.5 Gbps), Link/Act of Each Ethernet Port (10/100/1000 Mbps)
- Power Interfaces: DC Jack
- Physical Buttons: Reset Button
- Copper Speed and Distance: Cat. 3 or higher cable: 100 meters at 10 Mbps, Cat. 5 or higher cable: 100 meters at 100 Mbps, Cat. 5e or higher cable: 100 meters at 2.5 Gbps, Cat. 5e or higher cable: 250 meters at 10 Mbps
- Copper Speed and Distance Note: 250-meter transmission is available when the port speed is set at 10 Mbps in the software.
- Optical Spec and Distance: Depends on the Installed Optical Module
- MAC Address Table: 4096
- Max Switching Capacity: 60 Gbps
- Max Forwarding Rate: 44.64 Mpps
- Jumbo Frame: 9 KB
- Packet Buffer: 4 Mbit
- Basic Power Saving: True
- Power Methods: DC
- Power Input: 12V?1A
- Power Adapter in the Box: Input: 100-240V~, 50/60Hz, Output: 12V?1A
- Max Power Consumption: 10W (with SFP-RJ45 Module), 9W (with SFP-SC Module)
- Idle Power Consumption: 3.7W
- 802.3 Protocols: 802.3x Flow Control, 802.3i 10BASE-T, 802.3u 100BASE-TX, 802.3ab 1000BASE-T, 802.3bz 2.5GBASE-T, 2.5GBASE-X, 802.3z 1000BASE-X, 802.3ae 10GBASE-R
- 802.1 Protocols: 802.1p: LAN Layer 2 QoS/CoS, 802.1q: VLAN Bridge Operation
- Port Mirror Sessions: 1
- Port Trunk Groups: 2
- Max Port Num per Port Trunk Group: 4
- L2 Features: Loop Prevention, 802.1Q VLAN, DSCP QoS, 802.1p QoS, Port-Based QoS
- Grounding Methods: Grounding Point
- Operating Temperature: 0 ? ~ 40 ? (32 ? ~104 ?)
- Storage Temperature: -40 ? ~ 70 ? (-40 ? ~ 158 ?)
- Operating Humidity: 10% ~ 90% non-condensing
- Storage Humidity: 5% ~ 90% non-condensing
- Control Methods: Config Web Page
- Firmware Upgrade: Local Upgrade
- Reliability: Backup and Restore
- Diagnostic Tools: Ping
- Dimension: 190×100×28 mm, 7.48×3.94×1.1 inches
- Casing Material: Metal
- Installation: Desktop, Wall-mount
Cudy HS105U 5 Port Ethernet Switch
- Brand: Cudy
- Model No: Cudy HS105U Unmanaged Switch
- 2.5G RJ45 Ports: 5
- Shielded RJ45 Port: True
- Extend Mode Ports: Configurable
- VLAN Mode Ports: Configurable
- LED: Power, Link/ACT of Each Ethernet Port
- Power Interfaces: USB-C Port
- Physical Buttons: Reset Button
- Copper Speed and Distance: Cat. 3 or higher cable: 100 meters at 10 Mbps, Cat. 5 or higher cable: 100 meters at 100 Mbps, Cat. 5e or higher cable: 100 meters at 2.5 Gbps, Cat. 5e or higher cable: 250 meters at 10 Mbps
- Copper Speed and Distance Note: 250-meter transmission is available when the port speed is set at 10 Mbps in the software.
- MAC Address Table: 4096
- Max Switching Capacity: 25 Gbps
- Max Forwarding Rate: 18.6 Mpps
- Jumbo Frame: 9 KB
- Packet Buffer: 4 Mbit
- Basic Power Saving: True
- Power Methods: DC
- Power Input: 4.8-18V?
- Max Power Consumption: 6W
- Idle Power Consumption: 1.6W
- 802.3 Protocols: 802.3x Flow Control, 802.3i 10BASE-T, 802.3u 100BASE-TX, 802.3ab 1000BASE-T, 802.3bz 2.5GBASE-T
- 802.1 Protocols: 802.1p: LAN Layer 2 QoS/CoS, 802.1q: VLAN Bridge Operation
- Port Mirror Sessions: 1
- Port Trunk Groups: 2
- Max Port Num per Port Trunk Group: 4
- L2 Features: Loop Prevention, 802.1Q VLAN, DSCP QoS, 802.1p QoS, Port-Based QoS
- Operating Temperature: 0 ? ~ 40 ? (32 ? ~104 ?)
- Storage Temperature: -40 ? ~ 70 ? (-40 ? ~ 158 ?)
- Operating Humidity: 0% ~ 100% non-condensing
- Storage Humidity: 10% ~ 95% non-condensing
- Control Methods: Config Web Page
- Firmware Upgrade: Local Upgrade
- Reliability: Backup and Restore
- Diagnostic Tools: Ping
- Casing Material: Plastic
- Installation: Desktop, Wall-mount
- Dimension: 100×92×32.5 mm, 3.94×3.62×1.28 inches
Cudy HS105 5 Port Ethernet Switch
- Brand: Cudy
- Model No: Cudy HS105 Unmanaged Switch
- 2.5G RJ45 Ports: 5
- Shielded RJ45 Port: True
- LED: Power, Speed/Link/Act of Each Ethernet Port
- Power Interfaces: DC Jack
- Copper Speed and Distance: Cat. 5 or higher cable: 100 meters at 100 Mbps, Cat. 5e or higher cable: 100 meters at 2.5 Gbps
- MAC Address Table: 8192
- Max Switching Capacity: 25 Gbps
- Max Forwarding Rate: 18.6 Mpps
- Jumbo Frame: 15 KB
- Packet Buffer: 4 Mbit
- Basic Power Saving: True
- Power Methods: DC
- Power Input: 12V?1A
- Power Adapter in the Box: Input: 100-240V~, 50/60Hz, Output: 12V?1A
- Max Power Consumption: 10.5W
- Idle Power Consumption: 4.7W
- 802.3 Protocols: 802.3x Flow Control, 802.3u 100BASE-TX, 802.3ab 1000BASE-T, 802.3bz 2.5GBASE-T and 5GBASE-T
- L2 Features: IGMP Snooping, Loop Prevention, Loop Detection
- Grounding Methods: Grounding Point
- Operating Temperature: 0 ? ~ 40 ? (32 ? ~104 ?)
- Storage Temperature: -40 ? ~ 70 ? (-40 ? ~ 158 ?)
- Operating Humidity: 0% ~ 100% non-condensing
- Storage Humidity: 10% ~ 95% non-condensing
- Casing Material: Metal
- Dimension: 119×85×28 mm, 4.69×3.35×1.1 inches
- Weight: 267.0 g (9.42 oz.)
Cudy XS108 8 Port Switch
- Brand: Cudy
- Model No: Cudy XS108 Desktop Switch
- 10G RJ45 Ports: 8
- Ethernet Notes: 10G RJ45 supports 10G/5G/2.5G/1G/100M/10M speeds.
- Shielded RJ45 Port: True
- LED: Power, Speed/Link/Act of Each Ethernet Port
- Power Interfaces: AC Inlet
- Copper Speed and Distance: Cat. 5 or higher cable: 100 meters at 100 Mbps, Cat. 5e or higher cable: 100 meters at 2.5 Gbps, Cat. 6: 55 meters at 10 Gbps, Cat. 6A or higher cable: 100 meters at 10 Gbps
- MAC Address Table: 16384
- Max Switching Capacity: 160 Gbps
- Max Forwarding Rate: 119 Mpps
- Jumbo Frame: 12 KB
- Packet Buffer: 12 Mbit
- Basic Power Saving: True
- Power Methods: AC
- Power Input: 100-240V~ 50/60Hz
- Max Power Consumption: TBD
- Idle Power Consumption: TBD
- 802.3 Protocols: 802.3x Flow Control, 802.3i 10BASE-T, 802.3u 100BASE-TX, 802.3ab 1000BASE-T, 802.3bz 2.5GBASE-T and 5GBASE-T, 802.3an 10GBASE-T
- Fans: 1
- Grounding Methods: Three-Prong Plug, Grounding Point
- Operating Temperature: 0 ? ~ 45 ? (32 ? ~115 ?)
- Storage Temperature: -40 ? ~ 75 ? (-40 ? ~ 167 ?)
- Operating Humidity: 0% ~ 100% non-condensing
- Storage Humidity: 10% ~ 95% non-condensing
- Physical Security: 1× Kensington Security Slot
- Casing Material: Metal
- Dimension: 256×170×44 mm, 10.08×6.69×1.73 inches
Cudy XS105 5 Port Switch
- Brand: Cudy
- Model No: Cudy XS105 Desktop Switch
- 10G RJ45 Ports: 5
- Ethernet Notes: 10G RJ45 supports 10G/5G/2.5G/1G/100M/10M speeds.
- Shielded RJ45 Port: True
- LED: Power, Speed/Link/Act of Each Ethernet Port
- Power Interfaces: AC Inlet
- Copper Speed and Distance: Cat. 5 or higher cable: 100 meters at 100 Mbps, Cat. 5e or higher cable: 100 meters at 2.5 Gbps, Cat. 6: 55 meters at 10 Gbps, Cat. 6A or higher cable: 100 meters at 10 Gbps
- MAC Address Table: 16384
- Max Switching Capacity: 100 Gbps
- Max Forwarding Rate: 74.4 Mpps
- Jumbo Frame: 12 KB
- Packet Buffer: 12 Mbit
- Basic Power Saving: True
- Power Methods: AC
- Power Input: 100-240V~ 50/60Hz
- Max Power Consumption: TBD
- Idle Power Consumption: TBD
- 802.3 Protocols: 802.3x Flow Control, 802.3i 10BASE-T, 802.3u 100BASE-TX, 802.3ab 1000BASE-T, 802.3bz 2.5GBASE-T and 5GBASE-T, 802.3an 10GBASE-T
- Grounding Methods: Three-Prong Plug, Grounding Point
- Operating Temperature: 0 ? ~ 45 ? (32 ? ~115 ?)
- Storage Temperature: -40 ? ~ 75 ? (-40 ? ~ 167 ?)
- Operating Humidity: 0% ~ 100% non-condensing
- Storage Humidity: 10% ~ 95% non-condensing
- Physical Security: 1× Kensington Security Slot
- Casing Material: Metal
- Dimension: 220×162×44 mm, 8.66×6.38×1.73 inches
-->
CLICK TO CALL