BEST SELLING GRAPHTEC PLOTTER PRICELIST
Graphtec CE7000 160 Roll Feed Cutting Plotter
- Brand: Graphtec
- Model No: Graphtec CE7000 160 Cutting Plotter
- Configuration: Grit rolling type
- Drive method: Digital servo drive
- Max. cutting area (W x L) (*1): 1524?? × 50?
- Cutting area of guaranteed accuracy (*1): 1504?? × 2m, (1504?? × 5?)
- Mountable media width: Min-50mm, Max-1626mm(64inch)
- Mountable roll media mass: 20 kg
- Number of push rollers: 4 rollers(Max. 5 (option))
- Max. cutting speed at all direction: 1000mm/s at 45° direction
- Acceleration: 13.9m/s2 at 45° direction
- Cutting force: Max. 4.41N (450gf)
- Minimum character size: Approx. 5 mm alphanumeric (varies depending on character font and media)
- Mechanical resolution: 0.005mm
- Programmable resolution: GP-GL?0.1/0.05/0.025/0.01???HP-GL™ (*2)?0.025??
- Repeatability (*1): Max. 0.1 mm in plot up to 2 m (Excluding media expansion and contraction)
- Mountable number of tools: 1 tool
- Blade types: Supersteel
- Pen types: Oil-based ballpoint pen, Water-based fiber-tip pen
- Media types: Up to 0.25mm thickness, Marking film (PVC / fluorescence / reflection), polyester film (With specified conditions)
- Interface: USB 2.0 (Full Speed), Ethernet 10BASE-T/100BASE-TX
- Buffer memory: 2MB
- Command sets: GP-GL / HP-GL™ (Set by command or auto-detect) (*2)
- Display: Graphic type LCD with back-light (240dots x 128dots), supports 10 languages
- Power source: 100V to 240V AC, 50 / 60 Hz
- Power consumption: Up to 100W
- Operating environment: 10 to 35 ºC, 35 to 75 % R.H. (non-condensing)
- Guaranteed accuracy environment: 16 to 32 ºC, 35 to 70 % R.H. (non-condensing)
- External dimensions: 1916×811×1215 mm (1916×1148×1215 mm)(*3)
Graphtec CE7000 130 Roll Feed Cutting Plotter
- Brand: Graphtec
- Model No: Graphtec CE7000 130 Cutting Plotter
- Configuration: Grit rolling type
- Drive method: Digital servo drive
- Max. cutting area (W x L) (*1): 1270?? × 50?
- Cutting area of guaranteed accuracy (*1): 1250?? × 2m, (1250?? × 5?)
- Mountable media width: Min-50mm, Max-1372mm(54inch)
- Mountable roll media mass: 17 kg
- Number of push rollers: 4 rollers(Max. 5 (option))
- Max. cutting speed at all direction: 1000mm/s at 45° direction
- Acceleration: 13.9m/s2 at 45° direction
- Cutting force: Max. 4.41N (450gf)
- Minimum character size: Approx. 5 mm alphanumeric (varies depending on character font and media)
- Mechanical resolution: 0.005mm
- Programmable resolution: GP-GL?0.1/0.05/0.025/0.01???HP-GL™ (*2)?0.025??
- Repeatability (*1): Max. 0.1 mm in plot up to 2 m (Excluding media expansion and contraction)
- Mountable number of tools: 1 tool
- Blade types: Supersteel
- Pen types: Oil-based ballpoint pen, Water-based fiber-tip pen
- Media types: Up to 0.25mm thickness, Marking film (PVC / fluorescence / reflection), polyester film (With specified conditions)
- Interface: USB 2.0 (Full Speed), Ethernet 10BASE-T/100BASE-TX
- Buffer memory: 2MB
- Command sets: GP-GL / HP-GL™ (Set by command or auto-detect) (*2)
- Display: Graphic type LCD with back-light (240dots x 128dots), supports 10 languages
- Power source: 100V to 240V AC, 50 / 60 Hz
- Power consumption: Up to 100W
- Operating environment: 10 to 35 ºC, 35 to 75 % R.H. (non-condensing)
- Guaranteed accuracy environment: 16 to 32 ºC, 35 to 70 % R.H. (non-condensing)
- External dimensions: 1704×811×1215 mm (1704×1148×1215 mm)(*3)
Graphtec CE7000 60 Roll Feed Cutting Plotter
- Brand: Graphtec
- Model No: Graphtec CE7000 60 Cutting Plotter
- Configuration: Grit rolling type
- Drive method: Digital servo drive
- Max. cutting area (W x L) (*1): 603?? × 50?
- Cutting area of guaranteed accuracy (*1): 583?? × 2m, (583?? × 5?)
- Mountable media width: Min-50mm, Max-712mm(28inch)
- Mountable roll media mass: 9 kg
- Number of push rollers: 2 rollers
- Max. cutting speed at all direction: 900mm/s at 45° direction
- Acceleration: 21.2?/s2 at 45° direction
- Cutting force: Max. 4.41N (450gf)
- Minimum character size: Approx. 5 mm alphanumeric (varies depending on character font and media)
- Mechanical resolution: 0.005mm
- Programmable resolution: GP-GL?0.1/0.05/0.025/0.01???HP-GL™ (*2)?0.025??
- Repeatability (*1): Max. 0.1 mm in plot up to 2 m (Excluding media expansion and contraction)
- Mountable number of tools: 1 tool
- Blade types: Supersteel
- Pen types: Oil-based ballpoint pen, Water-based fiber-tip pen
- Media types: Up to 0.25mm thickness, Marking film (PVC / fluorescence / reflection), polyester film (With specified conditions)
- Interface: USB 2.0 (Full Speed), Ethernet 10BASE-T/100BASE-TX
- Buffer memory: 2MB
- Command sets: GP-GL / HP-GL™ (Set by command or auto-detect) (*2)
- Display: Graphic type LCD with back-light (240dots x 128dots), supports 10 languages
- Power source: 100V to 240V AC, 50 / 60 Hz
- Power consumption: Up to 100W
- Operating environment: 10 to 35 ºC, 35 to 75 % R.H. (non-condensing)
- Guaranteed accuracy environment: 16 to 32 ºC, 35 to 70 % R.H. (non-condensing)
- External dimensions: 1005×582×1092 mm (1005×936×1092 mm)(*3)
Graphtec CE7000 40 Roll Feed Cutting Plotter
- Brand: Graphtec
- Model No: Graphtec CE7000 40 Cutting Plotter
- Configuration: Grit rolling type
- Drive method: Digital servo drive
- Max. cutting area (W x L) (*1): 375?? × 50?
- Cutting area of guaranteed accuracy (*1): 355?? × 2m
- Mountable media width: Min-50mm, Max-484??(19inch)
- Mountable roll media mass: 5 kg
- Number of push rollers: 2 rollers
- Max. cutting speed at all direction: 600mm/s at all direction
- Acceleration: 21.2?/s2 at 45° direction
- Cutting force: Max. 4.41N (450gf)
- Minimum character size: Approx. 5 mm alphanumeric (varies depending on character font and media)
- Mechanical resolution: 0.005mm
- Programmable resolution: GP-GL?0.1/0.05/0.025/0.01???HP-GL™ (*2)?0.025??
- Repeatability (*1): Max. 0.1 mm in plot up to 2 m (Excluding media expansion and contraction)
- Mountable number of tools: 1 tool
- Blade types: Supersteel
- Pen types: Oil-based ballpoint pen, Water-based fiber-tip pen
- Media types: Up to 0.25mm thickness, Marking film (PVC / fluorescence / reflection), polyester film (With specified conditions)
- Interface: USB 2.0 (Full Speed), Ethernet 10BASE-T/100BASE-TX
- Buffer memory: 2MB
- Command sets: GP-GL / HP-GL™ (Set by command or auto-detect) (*2)
- Display: Graphic type LCD with back-light (240dots x 128dots), supports 10 languages
- Power source: 100V to 240V AC, 50 / 60 Hz
- Power consumption: Up to 100W
- Operating environment: 10 to 35 ºC, 35 to 75 % R.H. (non-condensing)
- Guaranteed accuracy environment: 16 to 32 ºC, 35 to 70 % R.H. (non-condensing)
- External dimensions: 772?292?313 mm
Graphtec CE7000 130AP Garment Pattern Cutting Plotter
- Brand: Graphtec
- Model No: Graphtec CE7000 130AP Cutting Plotter
- Configuration: Grit rolling type
- Drive method: Digital servo drive
- Max. cutting area (W x L) (*1): 1220 mm × 50 m
- Cutting area of guaranteed accuracy (*1): 1200 mm × 3 m
- Mountable media width (*2): Min. 594 mm, Max. 1321 mm
- Mountable roll media inside-diameter: 3 inches
- Mountable roll media outside-diameter: Max. 200 mm
- Mountable roll media mass: Max. 20 kg
- Number of push rollers: 5 rollers
- Cutting speed: Max. 600 mm/s at all direction
- Cutting force: Max. 4.41N (450gf )
- Mechanical resolution: 0.005 mm
- Programmable resolution: GP-GL?0.1 / 0.05 / 0.025 / 0.01 mm, HP-GLTM (*3)?0.025mm
- Repeatability: Max. 0.1 mm in plot up to 2 m (*1)(*4)
- Mountable number of tools: 2 tool
- Pen types: Oil-based ballpoint pen, Water-based fiber-tip pen
- Interface: USB 2.0 (Full Speed), Ethernet 10BASE-T/100BASE-TX
- Buffer memory: 2MB
- Command sets: GP-GL / HP-GLTM (*3) (Set by command)
- Display: Graphic type LCD with back-light (240dots x 128dots), supports 10 languages
- Power source: 100V to 120V AC, 200V to 240V AC, 50/60 Hz (Auto switch)
- Power consumption: 100W
- Operating environment: 10 to 35 ºC, 35 to 75 % R.H. (non-condensing)
- Guaranteed accuracy environment: 18 to 28 ºC, 40 to 65 % R.H. (non-condensing)
- External dimensions (W x D x H): Approx. 1704 × 1148 × 1215 mm (Including Stand and Basket)
- Weight: Approx. 60kg (Including Stand and Basket)
- Compatible OS (*5): Windows 11
Graphtec CE8000 130AP Garment Pattern Cutting Plotter
- Brand: Graphtec
- Model No: Graphtec CE8000 130AP Cutting Plotter
- Cutter type: Roll feed
- Drive system: Digital servo
- Max. cutting area (W × L) (*1): 1220mm × 50m
- Cutting area of guaranteed accuracy (*1): 1200mm × 3m
- Mountable media width (*2): Min. 594mm, Max. 1321mm
- Mountable roll media inside-diameter: 3 inches
- Mountable roll media outside-diameter: Max. 200mm
- Number of push rollers: 4
- Max. cutting speed: 600mm/s (All directions)
- Cutting force: Tool holder: 4.41N (450gf), Pen holder: 2.94N (300gf)
- Min. font size: 5mm (0.197in.) alphanumeric Helvetica med. Font (*1)
- Mechanical step size: 0.005mm
- Programmable step size: GP-GL: 0.1 / 0.05 / 0.025 / 0.01mm, HP-GLTM (*3): 0.025mm
- Repeatability (*1): 0.1mm or less / in unit of 2m (Designated Film and Cut Conditions)
- Installable number of tools: 2
- Pen types: Oil-based ballpoint pen, Water-based fiber-tip pen
- Interface: USB2.0 (Full Speed), Wireless LAN IEEE 802.11b/g/n, Ethernet 10 BASE-T/100BASE-TX (Available on Wired LAN model only.) (*4)
- Buffer memory: 2MB
- Command sets: GP-GL / HP-GLTM (*3) (Control panel switching)
- Display: Touch panel (240-dot × 128-dot)
- Power source: AC100V-120V / AC200V-240V, 50/60Hz (Auto switch)
- Power consumption: 140W or less
- Operating environment: 10 – 30?, 35 – 75% R.H. (non-condensing)
- Accuracy guaranteed environment: 18 – 28?, 40 – 65% R.H. (non-condensing)
- External dimensions (*5): 1644 × 1219 × 1076mm
- Weight (*5) (Approx.): 45.5kg
- Compatible OS (*6): Windows 11
Graphtec CE8000 130 Desktop Vinyl Cutting Plotter
- Brand: Graphtec
- Model No: Graphtec CE8000 130 Cutting Plotter
- Cutter type: Grit rolling type
- Drive system: Digital servo drive
- Max. cutting area (W x L) (*1): 1270mm × 50m
- Accuracy guaranteed cutting area (W x L)when using basket: 1250mm × 2m(1250mm × 5m)
- Mountable media width: Min-85mm, Max-1372mm (54inch)
- Mountable roll media weight: 17kg
- Number of push rollers: 3
- Max. cutting speed: 100cm/s (45°direction)
- Max. acceleration: 14.1m/s2 (45°direction)
- Cutting force: 4.41N (450gf)
- Min. Character size: Alphanumeric: approx. 5mm (varies depending on font and media)
- Mechanical step size: 0.005mm
- Programmable step size: GP-GL: 0.1 / 0.05 / 0.025 / 0.01mm, HP-GLTM (*2): 0.025mm
- Repeatability: Max. 0.1mm in plot up to 2m (Excluding media expansion and contraction)
- Installable number of tools: 1
- Blade types: Supersteel
- Pen types: Oil-based ballpoint pen, Water-based fiber-tip pen
- Media types: Max. 0.25mm thickness Marking film (PVC / fluorescent / reflective), *High intensity reflective sheet is not supported
- Interface: USB2.0 (Full Speed), Wireless LAN IEEE 802.11b/g/n, Ethernet 10 BASE-T/100BASE-TX (*3)
- Buffer memory: 2MB
- Command sets: GP-GL / HP-GL™ (Set by command or auto-detect)
- LCD display: Touch panel (240-dot × 128-dot)
- Power source: AC100-120V, AC200-240V, 50/60Hz (auto-switchover)
- Power consumption: Max. 140W
- Operating environment: 10 – 35? , 35 – 75? R.H. (non-condensing)
- Accuracy guaranteed environment: 16 – 32? , 35 – 70? R.H. (non-condensing)
- External dimensions(W x D x H)including stand: 1644 × 811 × 1076mm
Graphtec CE8000 60 Desktop Vinyl Cutting Plotter
- Brand: Graphtec
- Model No: Graphtec CE8000 60 Cutting Plotter
- Cutter type: Grit rolling type
- Drive system: Digital servo drive
- Max. cutting area (W x L) (*1): 603mm × 50m
- Accuracy guaranteed cutting area (W x L)when using basket: 583mm × 2m(583mm × 5m)
- Mountable media width: Min-50mm, Max-712mm (28inch)
- Mountable roll media weight: 9kg
- Number of push rollers: 2
- Max. cutting speed: 90cm/s (45°direction)
- Max. acceleration: 21.2m/s2 (45°direction)
- Cutting force: 4.41N (450gf)
- Min. Character size: Alphanumeric: approx. 5mm (varies depending on font and media)
- Mechanical step size: 0.005mm
- Programmable step size: GP-GL: 0.1 / 0.05 / 0.025 / 0.01mm, HP-GLTM (*2): 0.025mm
- Repeatability: Max. 0.1mm in plot up to 2m (Excluding media expansion and contraction)
- Installable number of tools: 1
- Blade types: Supersteel
- Pen types: Oil-based ballpoint pen, Water-based fiber-tip pen
- Media types: Max. 0.25mm thickness Marking film (PVC / fluorescent / reflective), *High intensity reflective sheet is not supported
- Interface: USB2.0 (Full Speed), Wireless LAN IEEE 802.11b/g/n, Ethernet 10 BASE-T/100BASE-TX (*3)
- Buffer memory: 2MB
- Command sets: GP-GL / HP-GL™ (Set by command or auto-detect)
- LCD display: Touch panel (240-dot × 128-dot)
- Power source: AC100-120V, AC200-240V, 50/60Hz (auto-switchover)
- Power consumption: Max. 140W
- Operating environment: 10 – 35? , 35 – 75? R.H. (non-condensing)
- Accuracy guaranteed environment: 16 – 32? , 35 – 70? R.H. (non-condensing)
- External dimensions(W x D x H)including stand: 903 × 582 × 1076mm
Graphtec CE8000 40 Desktop Vinyl Cutting Plotter
- Brand: Graphtec
- Model No: Graphtec CE8000 40 Cutting Plotter
- Cutter type: Grit rolling type
- Drive system: Digital servo drive
- Max. cutting area (W x L) (*1): 375mm × 50?
- Accuracy guaranteed cutting area (W x L)when using basket: 355mm × 2m
- Mountable media width: Min-50mm, Max-484mm (19inch)
- Mountable roll media weight: 5kg
- Number of push rollers: 2
- Max. cutting speed: 90cm/s (45°direction)
- Max. acceleration: 21.2m/s2 (45°direction)
- Cutting force: 4.41N (450gf)
- Min. Character size: Alphanumeric: approx. 5mm (varies depending on font and media)
- Mechanical step size: 0.005mm
- Programmable step size: GP-GL: 0.1 / 0.05 / 0.025 / 0.01mm, HP-GLTM (*2): 0.025mm
- Repeatability: Max. 0.1mm in plot up to 2m (Excluding media expansion and contraction)
- Installable number of tools: 1
- Blade types: Supersteel
- Pen types: Oil-based ballpoint pen, Water-based fiber-tip pen
- Media types: Max. 0.25mm thickness Marking film (PVC / fluorescent / reflective), *High intensity reflective sheet is not supported
- Interface: USB2.0 (Full Speed), Wireless LAN IEEE 802.11b/g/n, Ethernet 10 BASE-T/100BASE-TX (*3)
- Buffer memory: 2MB
- Command sets: GP-GL / HP-GL™ (Set by command or auto-detect)
- LCD display: Touch panel (240-dot × 128-dot)
- Power source: AC100-120V, AC200-240V, 50/60Hz (auto-switchover)
- Power consumption: Max. 140W
- Operating environment: 10 – 35? , 35 – 75? R.H. (non-condensing)
- Accuracy guaranteed environment: 16 – 32? , 35 – 70? R.H. (non-condensing)
- External dimensions(W x D x H)including stand: 677 x 289 x 266mm
Graphtec FC9000 160 Vinyl Cutting Plotter
- Brand: Graphtec
- Model No: FC9000 160 Cutting Plotter
- Configuration: Grit rolling type
- Drive method: Digital servo drive
- Max. cutting area (W x L) (*1): 1626mm × 50m
- Cutting area of guaranteed accuracy (*1): 1607mm × 10m 894mm × 15m
- Mountable media width (*2): Min. 50mm
- Mountable roll media diameter: 76 to 200mm (160mm when the optional paper flange (OPH-A21) is installed)
- Mountable roll media mass: 24kg
- Maximum cross cut width : 1626mm
- Max. cutting speed: 1485mm/s at 45° direction
- Axial acceleration: Max. 39.2m/s2 at 45° direction
- Cutting force: Max. 5.88N (600gf)
- Minimum character size: Approx. 3 mm alphanumeric (varies depending on character font and media)
- Mechanical resolution: 0.005mm
- Repeatability (*1): Max. 0.1 mm in plot up to 2 m (Excluding media expansion and contraction)
- Number of push rollers: 4 rollers
- Mountable number of tools: 1 tool (mountable 2 tools (option))
- Blade types: Supersteel
- Pen types: Oil-based ballpoint pen, Water-based fiber-tip pen
- Display: Graphic type LCD with back-light (240dots × 128dots), supports 10 languages
- Interface: USB 2.0(Full Speed), Ethernet 10BASE-T/100BASE-TX
- Buffer memory: 2MB
- Power source: 100 V to 240 V AC, 50 / 60 Hz
- Power consumption: Max. 120 W
- Operating environment : 10 to 35 ºC, 35 to 75 % R.H. (non-condensing)
- External dimensions (W × D × H): 2224?1151?1232 mm
- Weight: 70 kg
Graphtec FC9000 140 Vinyl Cutting Plotter
- Brand: Graphtec
- Model No: FC9000 140 Cutting Plotter
- Configuration: Grit rolling type
- Drive method: Digital servo drive
- Max. cutting area (W x L) (*1): 1372mm × 50m
- Cutting area of guaranteed accuracy (*1): 1352mm × 10m 894mm × 15m
- Mountable media width (*2): Min. 50mm
- Mountable roll media diameter: 76 to 200mm (160mm when the optional paper flange (OPH-A21) is installed)
- Mountable roll media mass: 20kg
- Maximum cross cut width: 1372mm
- Max. cutting speed: 1485mm/s at 45° direction
- Axial acceleration: Max. 39.2m/s2 at 45° direction
- Cutting force: Max. 5.88N (600gf)
- Minimum character size: Approx. 3 mm alphanumeric (varies depending on character font and media)
- Mechanical resolution: 0.005mm
- Repeatability (*1): Max. 0.1 mm in plot up to 2 m (Excluding media expansion and contraction)
- Number of push rollers: 4 rollers
- Mountable number of tools: 1 tool (mountable 2 tools (option))
- Blade types: Supersteel
- Pen types: Oil-based ballpoint pen, Water-based fiber-tip pen
- Display: Graphic type LCD with back-light (240dots × 128dots), supports 10 languages
- Interface: USB 2.0(Full Speed), Ethernet 10BASE-T/100BASE-TX
- Buffer memory: 2MB
- Power source: 100 V to 240 V AC, 50 / 60 Hz
- Power consumption: Max. 120 W
- Operating environment : 10 to 35 ºC, 35 to 75 % R.H. (non-condensing)
- External dimensions (W × D × H): 1970?1151?1232 mm
- Weight: 64 kg
Graphtec FC9000 100 Vinyl Cutting Plotter
- Brand: Graphtec
- Model No: FC9000 100 Cutting Plotter
- Configuration: Grit rolling type
- Drive method: Digital servo drive
- Max. cutting area (W x L) (*1): 1067mm × 50m
- Cutting area of guaranteed accuracy (*1): 1047mm × 10m 762mm × 15m
- Mountable media width (*2): Min. 50mm
- Mountable roll media diameter: 76 to 200mm (160mm when the optional paper flange (OPH-A21) is installed)
- Mountable roll media mass: 16kg
- Maximum cross cut width: 1067mm
- Max. cutting speed: 1485mm/s at 45° direction
- Axial acceleration: Max. 39.2m/s2 at 45° direction
- Cutting force: Max. 5.88N (600gf)
- Minimum character size: Approx. 3 mm alphanumeric (varies depending on character font and media)
- Mechanical resolution: 0.005mm
- Repeatability (*1): Max. 0.1 mm in plot up to 2 m (Excluding media expansion and contraction)
- Number of push rollers: 3 rollers
- Mountable number of tools: 1 tool (mountable 2 tools (option))
- Blade types: Supersteel
- Pen types: Oil-based ballpoint pen, Water-based fiber-tip pen
- Display: Graphic type LCD with back-light (240dots × 128dots), supports 10 languages
- Interface: USB 2.0(Full Speed), Ethernet 10BASE-T/100BASE-TX
- Buffer memory: 2MB
- Power source: 100 V to 240 V AC, 50 / 60 Hz
- Power consumption: Max. 120 W
- Operating environment: 10 to 35 ºC, 35 to 75 % R.H. (non-condensing)
- External dimensions (W × D × H): 1665?1151?1232 mm
- Weight: 56 kg
Graphtec FC9000 75 Vinyl Cutting Plotter
- Brand: Graphtec
- Model No: FC9000 75 Cutting Plotter
- Configuration: Grit rolling type
- Drive method: Digital servo drive
- Max. cutting area (W x L) (*1): 762mm × 50m
- Cutting area of guaranteed accuracy (*1): 742mm × 15m
- Mountable media width (*2): Min. 50mm
- Mountable roll media diameter: 76 to 200mm (160mm when the optional paper flange (OPH-A21) is installed)
- Mountable roll media mass: 12kg
- Maximum cross cut width: 762mm
- Max. cutting speed: 1485mm/s at 45° direction
- Axial acceleration: Max. 39.2m/s2 at 45° direction
- Cutting force: Max. 5.88N (600gf)
- Minimum character size: Approx. 3 mm alphanumeric (varies depending on character font and media)
- Mechanical resolution: 0.005mm
- Repeatability (*1): Max. 0.1 mm in plot up to 2 m (Excluding media expansion and contraction)
- Number of push rollers: 2 rollers
- Mountable number of tools: 1 tool (mountable 2 tools (option))
- Blade types: Supersteel
- Pen types: Oil-based ballpoint pen, Water-based fiber-tip pen
- Display: Graphic type LCD with back-light (240dots × 128dots), supports 10 languages
- Interface: USB 2.0(Full Speed), Ethernet 10BASE-T/100BASE-TX
- Buffer memory: 2MB
- Power source: 100 V to 240 V AC, 50 / 60 Hz
- Power consumption: Max. 120 W
- Operating environment : 10 to 35 ºC, 35 to 75 % R.H. (non-condensing)
- External dimensions (W × D × H): 1360?1151?1232 mm
- Weight: 49 kg
-->
CLICK TO CALL