BEST SELLING SUMMA PLOTTER PRICELIST
Summa F1625 F Series Flatbed Cutting Plotter
- Brand: Summa
- Model No: Summa F1625 Flatbed Cutting Plotter
- Cutting Area: 160 cm (63 in.) wide x 250 cm (98 in.) long; up to 50 m (164 ft.) long in multi-panel
- Media Width: Up to 165 cm (65 in.)
- Multi Panel: 5000 cm (1968 in.) Media clamps and roll-feed and/or conveyor belt system are required
- Repeatability: Within ± 0.05 mm on plots
- Accuracy: 0.05 % of move or 0.05 mm, whichever is greater
- Speed: Up to 1000 mm/sec (39.4 in./sec)
- Acceleration: Up to 1 G
- Clearance: 5 cm (2 in.) Distance between vacuum table and Y-beam. Not taking into account the thickness of a cutting mat or conveyor belt
- Maximum Alloced Forces: Vertical: 200 Newton, Horizontal: 200 Newton
- Maximum Table Load: 50 kg/m² (10.2 lb/ft²)
- Connectivity: USB
- Power Requirements: 3 Phase 208V+N or 3 Phase 230V or 3 Phase 400V+N
- Operating Temperatures: 15? to 35?C (59? to 95?F)
- Standard Accessories: Drag Module, Conveyor System, Roll-Feed System, Safety System 2020, Pneumatic Pack, ADC left&right, standard 36? blade holder, 1 standard blade, 1 fiber-tip pen, hex screwdriver (4mm), hex screwdriver (2.5mm), USB cable (3 meter), USB extension cable (0.5 meter), media guide flanges (set of 2), Summa GoProduce software.
- Optional Accessories: Tangential Module, F Series Routing System, HF Routing System, HT Rotary module, Electronic Oscillating Tool, Pneumatic Oscillating Tool, Kiss Cutting Tool, Single Edge Cutout Tool, Double Edge Cutout Tool, Heavy Duty Cutout Tool, Creasing Tools, V-Cut Tools, production software, basket (F1612), extension tables (F1612), wireless controller w/charger.
- Dimensions: 247 x 333 x 110 cm (97 x 131 x 43 in.)
- Weight: TBD
- Warranty: 1 Year Warranty.
Summa F1612 F Series Flatbed Cutting Plotter
- Brand: Summa
- Model No: Summa F1612 Flatbed Cutting Plotter
- Cutting Area: 160 cm (63 in.) wide x 120 cm (47 in.) long; up to 50 m (164 ft.) long in multi-panel
- Media Width: Up to 165 cm (65 in.)
- Multi Panel: 5000 cm (1968 in.) Media clamps and roll-feed and/or conveyor belt system are required
- Repeatability: Within ± 0.05 mm on plots
- Accuracy: 0.05 % of move or 0.05 mm, whichever is greater
- Speed: Up to 1000 mm/sec (39.4 in./sec)
- Acceleration: Up to 1 G
- Clearance: 5 cm (2 in.) Distance between vacuum table and Y-beam. Not taking into account the thickness of a cutting mat or conveyor belt
- Maximum Alloced Forces: Vertical: 200 Newton, Horizontal: 200 Newton
- Maximum Table Load: 50 kg/m² (10.2 lb/ft²)
- Connectivity: USB
- Power Requirements: 3 Phase 208V+N or 3 Phase 230V or 3 Phase 400V+N
- Operating Temperatures: 15? to 35?C (59? to 95?F)
- Standard Accessories: Drag Module, Conveyor System, Roll-Feed System, Safety System 2020, Pneumatic Pack, ADC left&right, standard 36? blade holder, 1 standard blade, 1 fiber-tip pen, hex screwdriver (4mm), hex screwdriver (2.5mm), USB cable (3 meter), USB extension cable (0.5 meter), media guide flanges (set of 2), Summa GoProduce software.
- Optional Accessories: Tangential Module, F Series Routing System, HF Routing System, HT Rotary module, Electronic Oscillating Tool, Pneumatic Oscillating Tool, Kiss Cutting Tool, Single Edge Cutout Tool, Double Edge Cutout Tool, Heavy Duty Cutout Tool, Creasing Tools, V-Cut Tools, production software, basket (F1612), extension tables (F1612), wireless controller w/charger.
- Dimensions: 247 x 220 x 110 cm (97 x 86 x 43 in.)
- Weight: 500 kg (1100 lbs)
- Warranty: 1 Year Warranty.
Summa S3 160 Vinyl Cutting Plotter
- Brand: Summa
- Model No: Summa S3 160 Cutting Plotter
- Media Width: 17 to 168 cm
- Max. Working Width: 158 cm x 50 m
- Alignment Type: OPOS X - OPOS Xtra, OPOS - CAM(factory upgrade), Barcode job recognition, Up to 2 x 64 marks on the X-line, Y-Line compensation
- Tracking Performance: 12 m max. within guaranteed specifications for media less than 760 mm, 4 m max. within guaranteed specifications for media larger than 760 mm
- Media Thickness: 0.05 mm to 0.25 mm / Up to 0.8 mm with sandblast drag knife / Up to 1.2 mm with sandblast tangential knife
- Accuracy: 0.2% of move or 0.25 mm, whichever is greater
- Speed: Up to 1440 mm/s diagonal
- Acceleration: Up to 4.2 G diagonal
- Knife Pressure: Drag Knife: Up to 400 grams / Tangential Knife: Up to 1000 grams
- Extra Pen or Creaser Pressure: Up to 1000 grams
- Other Features: FlexCut (cutting through)
- Connectivity: Ethernet, USB, WIFI
- Power Requirements: 100-120 / 220-240 VAC, 50/60 Hz,85 VA maximum
- Included Software: Summa GoSign Software, Summa Cutter Control / Plug-in: Illustrator, CorelDraw, MacSign
- Cutting Technology: Drag knife / Tangential knife
- Dual Head: Creasing tool / Fibre pen
- Dimensions: 225 x 69 x 111 cm
- Warranty: 1 Year Warranty.
Summa S3 140 Vinyl Cutting Plotter
- Brand: Summa
- Model No: Summa S3 140 Cutting Plotter
- Media Width: 17 to 145 cm
- Max. Working Width: 135 cm x 50 m
- Alignment Type: OPOS X - OPOS Xtra, Barcode job recognition, Up to 2 x 64 marks on the X-line, Y-Line compensation
- Tracking Performance: 12 m max. within guaranteed specifications for media less than 760 mm, 4 m max. within guaranteed specifications for media larger than 760 mm
- Media Thickness: 0.05 mm to 0.25 mm / Up to 0.8 mm with sandblast drag knife / Up to 1.2 mm with sandblast tangential knife
- Accuracy: 0.2% of move or 0.25 mm, whichever is greater
- Speed: Up to 1440 mm/s diagonal
- Acceleration: Up to 4.2 G diagonal
- Knife Pressure: Drag Knife: Up to 400 grams / Tangential Knife: Up to 1000 grams
- Other Features: FlexCut (cutting through)
- Connectivity: Ethernet, USB, WIFI
- Power Requirements: 100-120 / 220-240 VAC, 50/60 Hz,85 VA maximum
- Included Software: Summa GoSign Software, Summa Cutter Control / Plug-in: Illustrator, CorelDraw, MacSign
- Cutting Technology: Drag knife / Tangential knife
- Dimensions: 202 x 69 x 111 cm
- Warranty: 1 Year Warranty.
Summa S3 120 Vinyl Cutting Plotter
- Brand: Summa
- Model No: Summa S3 120 Cutting Plotter
- Media Width: 11.4 to 130 cm
- Max. Working Width: 120 cm x 50 m
- Alignment Type: OPOS X - OPOS Xtra, Barcode job recognition, Up to 2 x 64 marks on the X-line, Y-Line compensation
- Tracking Performance: 12 m max. within guaranteed specifications for media less than 760 mm, 4 m max. within guaranteed specifications for media larger than 760 mm
- Media Thickness: 0.05 mm to 0.25 mm / Up to 0.8 mm with sandblast drag knife / Up to 1.2 mm with sandblast tangential knife
- Accuracy: 0.2% of move or 0.25 mm, whichever is greater
- Speed: Up to 1440 mm/s diagonal
- Acceleration: Up to 4.2 G diagonal
- Knife Pressure: Drag Knife: Up to 400 grams / Tangential Knife: Up to 1000 grams
- Other Features: FlexCut (cutting through)
- Connectivity: Ethernet, USB, WIFI
- Power Requirements: 100-120 / 220-240 VAC, 50/60 Hz,85 VA maximum
- Included Software: Summa GoSign Software, Summa Cutter Control / Plug-in: Illustrator, CorelDraw, MacSign
- Cutting Technology: Drag knife / Tangential knife
- Dimensions: 187 x 69 x 111 cm
- Warranty: 1 Year Warranty.
Summa S3 75 Vinyl Cutting Plotter
- Brand: Summa
- Model No: Summa S3 75 Cutting Plotter
- Media Width: 6 to 84 cm
- Max. Working Width: 74.2 cm x 50 m
- Alignment Type: OPOS X - OPOS Xtra, OPOS - CAM (factory upgrade), Barcode job recognition, Up to 2 x 64 marks on the X-line, Y-Line compensation
- Tracking Performance: 12 m max. within guaranteed specifications for media less than 760 mm, 4 m max. within guaranteed specifications for media larger than 760 mm
- Media Thickness: 0.05 mm to 0.25 mm / Up to 0.8 mm with sandblast drag knife / Up to 1.2 mm with sandblast tangential knife
- Accuracy: 0.2% of move or 0.25 mm, whichever is greater
- Speed: Up to 1440 mm/s diagonal
- Acceleration: Up to 4.25 G diagonal
- Knife Pressure: Drag Knife: Up to 400 grams / Tangential Knife: Up to 1000 grams
- Extra Pen or Creaser Pressure: Up to 1000 grams
- Other Features: FlexCut (cutting through)
- Connectivity: Ethernet, USB, WIFI
- Power Requirements: 100-120 / 220-240 VAC, 50/60 Hz,85 VA maximum
- Included Software: Summa GoSign Software, Summa Cutter Control / Plug-in: Illustrator, CorelDraw, MacSign
- Cutting Technology: Drag knife / Tangential knife
- Dual Head: Creasing tool / Fibre pen
- Dimensions: 141 x 69 x 111 cm
- Warranty: 1 Year Warranty.
Summa S1 D160 Vinyl Cutting Plotter
- Brand: Summa
- Model No: Summa S1 D160 Cutting Plotter
- Media Width: 18.7 to 169 cm
- Max. Working Width: 158 cm x 50 m | 164 cm x 50 m
- Alignment Type: OPOS X - OPOS Xtra, Barcode job recognition, Up to 2 x 64 marks on the X-line, Y-Line compensation
- Tracking Performance: 8 m max. within guaranteed specifications for media less than 762 mm, 4 m max. within guaranteed specifications for media larger than 762 mm
- Media Thickness: 0.05 mm to 0.25 mm / 0.8 mm with optional sandblast knife
- Accuracy: 0.2% of move or 0.25 mm, whichever is greater
- Speed: Up to 1131 mm/s diagonal
- Acceleration: Up to 3 G diagonal
- Knife Pressure: 0 to 600 gr
- Other Features: FlexCut (cutting through)
- Connectivity: Ethernet, USB, WiFi (region dependent)
- Power Requirements: 100-240 VAC, 50/60 Hz
- Included Software: Summa GoSign Software, Summa Cutter Control / Plug-in: Illustrator, CorelDraw, MacSign
- Cutting Technology: Drag knife
- Dimensions: 196 x 70.4 x 111.2 cm
- Warranty: 1 Year Warranty.
Summa S1 D140 Vinyl Cutting Plotter
- Brand: Summa
- Model No: Summa S1 D140 Cutting Plotter
- Media Width: 18.7 to 150 cm
- Max. Working Width: 138.5 cm x 50 m | 144.5 cm x 50 m
- Alignment Type: OPOS X - OPOS Xtra, Barcode job recognition, Up to 2 x 64 marks on the X-line, Y-Line compensation
- Tracking Performance: 8 m max. within guaranteed specifications for media less than 762 mm, 4 m max. within guaranteed specifications for media larger than 762 mm
- Media Thickness: 0.05 mm to 0.25 mm / 0.8 mm with optional sandblast knife
- Accuracy: 0.2% of move or 0.25 mm, whichever is greater
- Speed: Up to 1131 mm/s diagonal
- Acceleration: Up to 3 G diagonal
- Knife Pressure: 0 to 600 gr (D140 FX: 0 to 400 gr)
- Other Features: FlexCut (cutting through)
- Connectivity: Ethernet, USB, WiFi (region dependent)
- Power Requirements: 100-240 VAC, 50/60 Hz
- Included Software: Summa GoSign Software, Summa Cutter Control / Plug-in: Illustrator, CorelDraw, MacSign
- Cutting Technology: Drag knife
- Dimensions: 176.5 x 70.4 x 111.2 cm
- Warranty: 1 Year Warranty.
Summa S1 D120 Vinyl Cutting Plotter
- Brand: Summa
- Model No: Summa S1 D120 Cutting Plotter
- Media Width: 13.3 to 135 cm
- Max. Working Width: 123.5 cm x 50 m | 129.5 cm x 50 m
- Alignment Type: OPOS X - OPOS Xtra, Barcode job recognition, Up to 2 x 64 marks on the X-line, Y-Line compensation
- Tracking Performance: 8 m max. within guaranteed specifications for media less than 762 mm, 4 m max. within guaranteed specifications for media larger than 762 mm
- Media Thickness: 0.05 mm to 0.25 mm / 0.8 mm with optional sandblast knife
- Accuracy: 0.2% of move or 0.25 mm, whichever is greater
- Speed: Up to 1131 mm/s diagonal
- Acceleration: Up to 3 G diagonal
- Knife Pressure: 0 to 600 gr
- Other Features: FlexCut (cutting through)
- Connectivity: Ethernet, USB, WiFi (region dependent)
- Power Requirements: 100-240 VAC, 50/60 Hz
- Included Software: Summa GoSign Software, Summa Cutter Control / Plug-in: Illustrator, CorelDraw, MacSign
- Cutting Technology: Drag knife
- Dimensions: 161.5 x 70.4 x 111.2 cm
- Warranty: 1 Year Warranty.
Summa S1 D60 Vinyl Cutting Plotter
- Brand: Summa
- Model No: Summa S1 D60 Cutting Plotter
- Media Width: 7.9 to 70.5 cm
- Max. Working Width: 59 cm x 50 m | 65 cm x 50 m
- Alignment Type: OPOS X - OPOS Xtra, Barcode job recognition, Up to 2 x 64 marks on the X-line, Y-Line compensation
- Tracking Performance: 8 m max. within guaranteed specifications for media less than 762 mm, 4 m max. within guaranteed specifications for media larger than 762 mm
- Media Thickness: 0.05 mm to 0.25 mm / 0.8 mm with optional sandblast knife
- Accuracy: 0.2% of move or 0.25 mm, whichever is greater
- Speed: Up to 1131 mm/s diagonal
- Acceleration: Up to 3 G diagonal
- Knife Pressure: 0 to 600 gr
- Other Features: FlexCut (cutting through)
- Connectivity: Ethernet, USB, WiFi (region dependent)
- Power Requirements: 100-240 VAC, 50/60 Hz
- Included Software: Summa GoSign Software, Summa Cutter Control / Plug-in: Illustrator, CorelDraw, MacSign
- Cutting Technology: Drag knife
- Dimensions: 97 x 40.6 x 30.4 cm
- Warranty: 1 Year Warranty.
-->
CLICK TO CALL