Chennai Support : +91-9941959697 / 9841094109

Hyderabad Support : +91-9841934193 / 9841311311

server price in hyderabad, telangana, andhra pradesh, tirupati, nellore, vizag, india

Cisco Enterprises

Cisco MGX 8850 PXM 45 Processor Switch Module dealers in hyderabad, andhra, nellore, vizag, bangalore, telangana, kerala, bangalore, chennai, india

Cisco MGX 8850 PXM 45 Processor Switch Module

Key Features
64-bit MIPS-based processor operating at 700 MHz
45-Gbps switch fabric and 1.2-Gbps cell-bus (when used with chassis other than the Cisco MGX 8950)
Cisco PXM-45/C used only as processor in Cisco MGX 8950; Cisco MGX-XM-60 provides switch-fabric function in that chassis
Hot swappable
1:1 hot-standby redundancy
User-selectable primary and secondary clock sources with graceful switchover
Internal Stratum-3, external Building Integrated Timing Supply (BITS), or in-band clock sources
In-band or out-of-band management using EIA/TIA-232 or 10BASE-T control ports
Support for narrowband and broadband service modules scaling from DS-0 to OC-48c/STM-16 or DS-3/E3 to OC-192/STM-64 (depending on the chassis used)

Chassis compatibility
Cisco MGX 8830/B, MGX 8850, MGX 8850/B, MGX 8880, and MGX 8950

Software compatibility
Minimum Cisco MGX software release supporting Cisco PXM-45/C:
Cisco MGX 8850 Software Release 4.0.15
Cisco MGX 8950 Software Release 4.0.15
 Cisco MGX Software Release 5.0.20 (for Cisco MGX 8880 and MGX 8850/B)
Cisco MGX Software Release 5.2.00 (for Cisco MGX 8830/B)

Network Management
 Managed by Cisco WAN Manager Software suite
 Based on Simple Network Management Protocol (SNMP)

Power
Input power required: -48 VDC
Power consumption: 128 W

Physical Dimensions
H x D: 15.75 x 16.5 in. (40.00 x 41.91 cm)

Weight
6.5 lbs
Cisco MGX 8800 Series Switches dealers in hyderabad, andhra, nellore, vizag, bangalore, telangana, kerala, bangalore, chennai, india

Cisco MGX 8800 Series Switches

Key Features
The main features of the Cisco 8-Port OC-12/STM-4 Channelized/Unchannelized ATM Switch Service Module are listed here.
Full nonblocking, full-duplex line-rate throughput on all 8 ports when used on the Cisco MGX 8950 chassis
Up to 4 ports with nonblocking, full-duplex line-rate throughput when used on the Cisco MGX 8800 chassis
Individual port channelization down to DS-3 and OC-3c/STM-1
Per-virtual-path and per-virtual-circuit traffic shaping and available bit rate (ABR) with virtual source and virtual destination
APS (1:1 and 1+1) port redundancy, plus APS 1+1 card redundancy
Up to 4 million cell buffers
Up to 16 classes of service (CoS) that can be used to support IP or ATM services
Support for standards-based Private Network-to-Network Interface (PNNI), switched virtual circuit (SVC) and switched virtual path (SVP), 
soft permanent virtual connection (SPVC) and soft permanent virtual path (SPVP), and Multiprotocol Label Switching (MPLS) services

Chassis Compatibility
Cisco MGX 8830/B, MGX 8850, MGX 8850/B, MGX 8880, and MGX 8950

Software Compatibility
Cisco MGX 8800/8900 Software Release 5.2.00 and above for Cisco MGX 8830/B, MGX 8850, MGX 8850/B, and MGX 8950
Cisco MGX 8800/8900 Software Release 5.3.00 and above for Cisco MGX 8880

Protocols
ATM and SONET/SDH

Port Density
8 ports (4 ports at full line rate on the Cisco MGX 8800 chassis)

Network Management
Managed by Cisco WAN Manager software suite
Based on Simple Network Management Protocol (SNMP)

Power
Input power required: -48 VDC
 Power consumption: 134W

Physical Dimensions
H x D: 15.83 x 15.65 in. (40.20 x 39.75 cm)

Weight
6.5 lb (2.95 kg)
Cisco MGX 8900 Series Switches dealers in hyderabad, andhra, nellore, vizag, bangalore, telangana, kerala, bangalore, chennai, india

Cisco MGX 8900 Series Switches

Key Features
The main features of the Cisco 8-Port OC-12/STM-4 Channelized/Unchannelized ATM Switch Service Module are listed here.
Full nonblocking, full-duplex line-rate throughput on all 8 ports when used on the Cisco MGX 8950 chassis
Up to 4 ports with nonblocking, full-duplex line-rate throughput when used on the Cisco MGX 8800 chassis
Individual port channelization down to DS-3 and OC-3c/STM-1
Per-virtual-path and per-virtual-circuit traffic shaping and available bit rate (ABR) with virtual source and virtual destination
APS (1:1 and 1+1) port redundancy, plus APS 1+1 card redundancy
Up to 4 million cell buffers
Up to 16 classes of service (CoS) that can be used to support IP or ATM services
Support for standards-based Private Network-to-Network Interface (PNNI), switched virtual circuit (SVC) and switched virtual path (SVP), 
soft permanent virtual connection (SPVC) and soft permanent virtual path (SPVP), and Multiprotocol Label Switching (MPLS) services

Chassis Compatibility
Cisco MGX 8830/B, MGX 8850, MGX 8850/B, MGX 8880, and MGX 8950

Software Compatibility
Cisco MGX 8800/8900 Software Release 5.2.00 and above for Cisco MGX 8830/B, MGX 8850, MGX 8850/B, and MGX 8950
Cisco MGX 8800/8900 Software Release 5.3.00 and above for Cisco MGX 8880

Protocols
ATM and SONET/SDH

Port Density
8 ports (4 ports at full line rate on the Cisco MGX 8800 chassis)

Network Management
Managed by Cisco WAN Manager software suite
Based on Simple Network Management Protocol (SNMP)

Power
Input power required: -48 VDC
 Power consumption: 134W

Physical Dimensions
H x D: 15.83 x 15.65 in. (40.20 x 39.75 cm)

Weight
6.5 lb (2.95 kg)
Cisco MGX XM60 Switching Module dealers in hyderabad, andhra, nellore, vizag, bangalore, telangana, kerala, bangalore, chennai, india

Cisco MGX XM60 Switching Module

Key feattures :
The Cisco MGX-XM60 Switching Module has the following primary features:
Single-height card
60-Gbps nonblocking crosspoint switch fabric
Dynamic sharing of capacity across multiple Cisco XM-60s, allowing for N + 1 redundancy
Four installed in each Cisco MGX 8950 for 240-Gbps total capacity, 180-Gbps redundant capacity
Hot card insertion/removal
Complete separation from control processor, allowing data forwarding in the event of control card failure

Chassis compatibility
MGX 8950

Software compatibility
MGX S/W Releases supporting MGX-XM60:
MGX Rls 4.0.15 and above

Network management
Managed by Cisco WAN Manager Software suite
Based on Simple Network Management Protocol (SNMP)

Power
Input power required: -48 VDC
Power consumption: 61 W

Physical dimensions
H x D: 7.25 x 16.5 in. (18.41 x 41.91 cm)

Weight
3.5 lb
Cisco MGX 8850 AXSM Broadband ATM Switching Module dealers in hyderabad, andhra, nellore, vizag, bangalore, telangana, kerala, bangalore, chennai, india

Cisco MGX 8850 AXSM Broadband ATM Switching Module

AXSM can be used in the MGX 8850 to provide ATM capability up to OC-48c/STM-16.
High scalability in interface speeds with T3/E3 ports, OC-3c/STM-1, OC-12c/STM-4, and OC-48c/ STM-16 AXSM modules. Each port on the AXSM can be configured for either trunk or access applications.
Industry leading module port densities of 16 T3/E3 ports, 16 OC-3c/STM-1 ports, 4 OC-12c/STM-4 ports, and 1 OC-48c/ STM-16 port that can scale up to 12 OC-48c/STM-16 modules in each MGX 8850 Multiservice Switch. Each OC-48c/STM-16 delivers fully nonblocking, full duplex throughput, in which a connection can occupy the entire line rate.
Support for all ATM service classes, with up to 16 classes of service (CoS). Supports carrier-class implementation of standards-based PNNI, SVC/SVP, SPVC/SPVP, and MPLS services. Large cell buffers (one million cells), which help to maximize "goodput" performance during congestion, reducing the number of retransmits; the buffers are allocated dynamically, depending on connection resource needs, thereby optimizing use of system resources.
High reliability with hot-standby 1:1 AXSM card redundancy, 1:1 and 1+1 line redundancy using APS.

 Ports and trunks supported on same AXSM module
User-Network Interface (UNI) Specifications 3.0, 3.1, 4.0

Network Management
 Management using Cisco WAN Manager software suite
Based on Simple Network Management Protocol (SNMP)

Physical Specifications

Dimensions: (H x D) 15.83 x 15.65 in.

Electrical Specifications
Input power required: -48 VDC
Power consumption: 95W
Cisco MGX 8830 ATM Multiservice Switch dealers in hyderabad, andhra, nellore, vizag, bangalore, telangana, kerala, bangalore, chennai, india

Cisco MGX 8830 ATM Multiservice Switch

Key Features: 
The main features of the Cisco MGX 8800/8900 16-Port OC-3c/STM-1 ATM Switch Service Module are listed here.
Full nonblocking, full-duplex line-rate throughput on all 16 ports
High reliability with hot-standby 1+1 16-port ATM switch service module card redundancy
Per-virtual-path and per-virtual-circuit traffic shaping and available bit rate (ABR) with virtual source and virtual destination
Y-cable and APS (1:1 and 1+1) port redundancy, plus APS 1+1 card redundancy
Up to 4 million cell buffers
Up to 16 classes of service (CoS) that can be used to support IP or ATM services
Support for standards-based Private Network-to-Network Interface (PNNI), switched virtual circuit (SVC) and switched virtual path (SVP), soft permanent virtual connection (SPVC) and soft permanent virtual path (SPVP), and Multiprotocol Label Switching (MPLS) services

Chassis Compatibility: 
Cisco MGX 8830/B, MGX 8850, MGX 8850/B, and MGX 8950

Software Compatibility: 
Cisco MGX 8800/8900 SW Release 5.0.20 and above

Protocols : 
ATM and SONET/SDH

Port Density : 
16 ports

Network Management
 Managed by Cisco WAN Manager software suite
 Based on Simple Network Management Protocol (SNMP)

Power
Input power required: -48 VDC
Power consumption: 114W

Physical Dimensions
H x D: 15.83 x 15.65 in. (40.20 x 39.75 cm)

Weight
6.5 lb (2.95 kg)
Cisco Aironet 1540 Series Outdoor Access Point dealers in hyderabad, andhra, nellore, vizag, bangalore, telangana, kerala, bangalore, chennai, india

Cisco Aironet 1540 Series Outdoor Access Point

  • Aironet 1542I
  • Semi omnidirectional antenna
  • 802.11ac Wave 2 support
  • MU MIMO 2x2, 2 spatial streams
  • Flexible deployment with Mobility Express
  • as traditional APs, and in mesh networks
  • Aironet 1542D
  • Directional antenna
  • 802.11ac Wave 2 support
  • MU-MIMO 2x2, 2 spatial streams
  • Flexible deployment with Mobility Express
  • as traditional APs, and in mesh networks
  • 802.11ac Wave 1 and 2 capabilities
  • 1542I/D: 2 x 2 MIMO with two spatial streams
  • Multiuser and single user MIMO
  • Maximal Ratio Combining (MRC)
  • 802.11ac beamforming (transmit beamforming)
  • 20-, 40-, and 80-MHz channels
  • PHY data rates up to 867 Mbps (80 MHz in 5 GHz)
  • Packet aggregation: A-MPDU (Tx/Rx) and A-MSDU (Tx/Rx)  
  • 802.11 Dynamic Frequency Selection (DFS)
  • Cyclic Shift Diversity (CSD) support
  • 802.11n (and related) capabilities
  • 1542I/D: 2 x 2 MIMO with two spatial streams
  • MRC
  • 20- and 40-MHz channels (40 MHz in 5 GHz)
  • PHY data rates up to 300 Mbps
  • Packet aggregation: A-MPDU (Tx/Rx) and A-MSDU (Tx/Rx)
  • 802.11 DFS
  • CSD support
  • Data rates supported: 802.11a: 6, 9, 12, 18, 24, 36, 48, and 54 Mbps
  • 802.11b/g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54 Mbps
  • 802.11n data rates on 2.4 and 5 GHz
  • Maximum conducted transmit power
  • 1542I
  • 2.4 GHz: 27 dBm with 2 antennas
  • 5 GHz: 25 dBm with 2 antennas
  • 1542D
  • 2.4 GHz: 27 dBm with 2 antennas
  • 5 GHz: 25 dBm with 2 antennas
  • Interfaces
  • WAN port 10/100/1000BASE-T Ethernet autosensing (RJ-45) PoE
  • Management console port (RJ-45)
  • Multicolor LED/Reset button
  • Wireless Access
  • 802.11i, Wi-Fi Protected Access 2 (WPA2), and WPA
  • 802.1X authentication, including Extensible Authentication Protocol (EAP) and Protected EAP (EAP -PEAP), EAP Transport Layer Security (EAP-TLS), EAP-Tunneled TLS
  • (EAP-TTLS), EAP-Subscriber Identity Module (EAP-SIM), and Cisco LEAP
  • VPN pass-through
  • IP Security (IPsec)
  • Layer 2 Tunneling Protocol (L2TP)
  • MAC address filtering
  • Uplink options: Ethernet and wireless mesh
  • Dimensions(L x W x H):
  • 1542I/D: 7.9 x 5.9 x 2.4 in.(20 x 15 x 6.1 cm)
  • Weight
  • 1542I/D: 2.75 lb (1.25 kg)
  • Warranty: 1 year limited hardware warranty
Cisco Aironet 1560 Series Outdoor Access Point dealers in hyderabad, andhra, nellore, vizag, bangalore, telangana, kerala, bangalore, chennai, india

Cisco Aironet 1560 Series Outdoor Access Point

  • Aironet 1562I
  • 802.11ac Wave 2 support
  • 3x3 MU-MIMO, 3 spatial streams
  • Internal antenna
  • Aironet 1562E
  • 802.11ac Wave 2 support
  • 2x2 MU-MIMO, 2 spatial streams
  • Flexible antenna ports
  • External antenna
  • Aironet 1562D
  • 802.11ac Wave 2 support
  • 2x2 MU-MIMO, 2 spatial streams
  • Directional antenna
  • 802.11ac Wave 1 and 2 capabilities
  • 1562I: 3 x 3 MIMO with three spatial streams
  • 1562E/D 2 x 2 MIMO with two spatial streams
  • Multi and single user MIMO
  • Maximal Ratio Combining (MRC)
  • 802.11ac beamforming (transmit beamforming)
  • 20-, 40-, and 80 MHz channels
  • PHY data rates up to 1.3 Gbps (80 MHz in 5 GHz)
  • Packet aggregation: A MPDU (Tx/Rx) and A MSDU (Tx/Rx)
  • 802.11 Dynamic Frequency Selection (DFS)
  • Cyclic Shift Diversity (CSD) support
  • 802.11n (and related) capabilities
  • 1562I: 3 x 3 MIMO with three spatial streams
  • 1562E/D: 2 x 2 MIMO with two spatial streams
  • MRC
  • 20- and 40 MHz channels
  • PHY data rates up to 450 Mbps
  • Packet aggregation: A-MPDU (Tx/Rx) and A-MSDU (Tx/Rx)
  • 802.11 DFS
  • CSD support
  • Data rates supported
  • 802.11a: 6, 9, 12, 18, 24, 36, 48, and 54 Mbps
  • 802.11b/g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54 Mbps
  • Interfaces
  • WAN port 10/100/1000BASE-T Ethernet, autosensing (RJ-45), PoE
  • SFP port (fiber or electrical)
  • Management console port (RJ-45)
  • Multicolor LED
  • DC power input
  • Reset button
  • Uplink options
  • Ethernet, SFP, and wireless mesh (future availability)
  • Dimensions(L x W x D)
  • 1562I: 9.0 x 6.8 x 3.9 in (22.9 x 17.1 x 9.8 cm)
  • 1562D: 9.0 x 6.8 x 4.3 in (22.9 x 17.1 x 10.9 cm)
  • 1562E:: 9.0 x 6.8 x 3.9 in (22.9 x 17.1 x 9.8 cm)
  • Weight
  • 1562I: 5.6 lb (2.5 kg)
  • 1562D: 5.7 lb (2.6 kg)
  • 1562E: 5.6 lb (2.5 kg)
  • Warranty: 1 year limited hardware warranty
Cisco Aironet 1570 Series Outdoor Access Point dealers in hyderabad, andhra, nellore, vizag, bangalore, telangana, kerala, bangalore, chennai, india

Cisco Aironet 1570 Series Outdoor Access Point

  • 802.11ac support
  • 4x4 MIMO, 3 spatial streams
  • Flexible antenna port
  • 802.11n Version 2.0 capabilities
  • 4x4 MIMO with three spatial streams (3SS)
  • Maximal Ratio Combining (MRC)
  • 802.11n and 802.11a/g Beamforming
  • 20- and 40-MHz channels
  • PHY data rates up to 450 Mbps (40 MHz with 5 GHz)
  • Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
  • 802.11 Dynamic Frequency Selection (DFS)
  • Cyclic Shift Diversity (CSD) support
  • 802.11ac Wave 1 capabilities
  • 4x4 MIMO with three spatial streams (3SS)
  • Maximum Ratio Combining (MRC)
  • 802.11ac Beamforming
  • 20-, 40-, and 80-MHz channels
  • PHY data rates up to 1.3 Gbps (80 MHz with 5 GHz)
  • Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
  • 802.11 Dynamic Frequency Selection (DFS)
  • Cyclic Shift Diversity (CSD) support
  • Data Rates Supported: 2.4 GHz - 802.11b/g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54 Mbps
  • Interface
  • WAN port 10/100/1000BASE T Ethernet, autosensing (RJ-45)
  • LAN port 10/100/1000BASE T Ethernet, autosensing (RJ-45)
  • Fiber SFP
  • Cable modem: NA-DOCSIS3.0/Euro-DOCSIS3.0/Japan-DOCSIS3.0 (8x4, 16x8, or 24x8)
  • Management console port (RJ-45)
  • Four multicolor LEDs
  • Reset button
  • Uplink options
  • 1572EAC Ethernet, Fiber SFP, Wireless Mesh
  • 1572IC Ethernet, Fiber SFP, Wireless Mesh, Cable Modem
  • 1572EC Ethernet, Fiber SFP, Wireless Mesh, Cable Modem
  • Dimensions (L x W x D): 1572EAC / 1572EC 11.8 x 7.9 x 6.3 in. (30.0 x 20.1 x 16.0 cm)
  • 1572IC 11.8 x 7.9 x 7.9 in. (30.0 x 20.1 x 20.1 cm)
  • Weight
  • 1572EAC/1572EC 13.5 lbs (6.1 kg)
  • 1572IC 11.5 lbs (5.2 kg)
  • Pole mounting Kit 1 (PMK1):2.2 lbs (1.0 kg)
  • Pole mounting Kit 2 (PMK2):4.4 lbs (2.0 kg)
  • Pole mounting Kit 3 (PMK3):6.1 lbs (2.8 kg)
  • Cable strand mounting bracket 1 (SMK1): 0.3 lbs (0.2 kg)
  • Cable strand mounting bracket 2 (SMK2): 0.7 lbs (0.3 kg)
  • Cable strand mounting bracket 2 (SMK3): 1.2 lbs (0.5 kg)
  • Warranty: 1 year limited Hardware warranty
Cisco Catalyst 9115 Access Point dealers in hyderabad, andhra, nellore, vizag, bangalore, telangana, kerala, bangalore, chennai, india

Cisco Catalyst 9115 Access Point

  • Three radios: 2.4GHz (4x4), 5GHz (4x4), and BLE, Supports OFDMA and MU-MIMO, Internal and external antenna
  • Software: Cisco Unified Wireless Network Software Release 8.9 or later
  • Cisco IOS XE Software Release 16.11 or later
  • Supported wireless LAN controllers: Cisco Catalyst 9800 Series Wireless Controllers
  • Cisco 3500, 5520, and 8540 Series Wireless Controllers and Cisco Virtual Wireless Controller
  • 802.11n version 2.0 (and related) capabilities
  • 4x4 MIMO with four spatial streams
  • Maximal Ratio Combining (MRC)
  • 802.11n and 802.11a/g beamforming
  • 20- and 40-MHz channels
  • PHY data rates up to 890 Mbps (40 MHz with 5 GHz and 20 MHz with 2.4 GHz)
  • Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
  • 802.11 Dynamic Frequency Selection (DFS)
  • Cyclic Shift Diversity (CSD) support
  • 802.11ac
  • 4x4 downlink MU-MIMO with four spatial streams
  • MRC
  • 802.11ac beamforming
  • 20-, 40-, 80-, and 160-MHz channels
  • PHY data rates up to 3.47 Gbps (160 MHz with 5 GHz)
  • Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
  • 802.11 DFS
  • CSD support
  • 802.11ax
  • 4x4 downlink MU-MIMO with four spatial streams
  • Uplink/downlink OFDMA
  • TWT
  • BSS coloring
  • MRC
  • 802.11ax beamforming
  • 20-, 40-, 80-, and 160-MHz channels
  • PHY data rates up to 5.38 Gbps (160 MHz with 5 GHz and 20 MHz with 2.4 GHz)
  • Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
  • 802.11 DFS
  • CSD support
  • Integrated antenna: 2.4 GHz, peak gain 3 dBi, internal antenna, omnidirectional in azimuth
  • 5 GHz, peak gain 4 dBi, internal antenna, omnidirectional in azimuth
  • External antenna (sold separately)
  • Cisco Catalyst 9115AXE Access Points are certified for use with antenna gains up to 6 dBi (2.4 GHz and 5 GHz)
  • Cisco offers the industry's broadest selection of antennas, delivering optimal coverage for a variety of deployment scenarios
  • Interfaces: 1x 100, 1000, 2500 Multigigabit Ethernet (RJ-45) – IEEE 802.3bz
  • Management console port (RJ-45), USB 2.0 (enabled via future software)
  • Indicators: Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors
  • Dimensions (W x L x H)
  • Access point (without mounting brackets): C9115I: 8.0 x 8.0 x 1.5 in. (20.3 x 20.3 x 3.8 cm), C9115E: 8.0 x 8.0 x 1.7 in. (20.3 x 20.3 x 4.3 cm)
  • Weight: Cisco Catalyst 9115AXI, 1.98 lb (0.9 kg)
  • Cisco Catalyst 9115AXE, 2.43 lb (1.1 kg)
  • System memory: 2048 MB DRAM, 1024 MB flash
  • Warranty: Limited lifetime hardware warranty
Cisco Catalyst 9120 Series Access Point dealers in hyderabad, andhra, nellore, vizag, bangalore, telangana, kerala, bangalore, chennai, india

Cisco Catalyst 9120 Series Access Point

  • Four radios: 2.4 GHz (4x4), 5 GHz (4x4), Cisco RF ASIC and BLE/IoT
  • Cisco Flexible Radio Assignment and Cisco CleanAir Technology
  • Internal and external antenna
  • Software
  • Cisco Unified Wireless Network Software Release 8.9.x or later
  • Cisco IOS XE Software Release 16.11 with AP Device Pack, or later
  • Supported wireless LAN controllers
  • Cisco Catalyst 9800 Series Wireless Controllers
  • Cisco 3500, 5520, and 8540 Series Wireless Controllers and Cisco Virtual Wireless Controller
  • 802.11n version 2.0 (and related) capabilities
  • 4x4 MIMO with four spatial streams
  • Maximal Ratio Combining (MRC)
  • 802.11n and 802.11a/g beamforming
  • 20- and 40-MHz channels
  • PHY data rates up to 890 Mbps (40 MHz with 5 GHz and 20 MHz with 2.4 GHz)
  • Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
  • 802.11 Dynamic Frequency Selection (DFS)
  • Cyclic Shift Diversity (CSD) support
  • 802.11ac
  • 4x4 downlink MU-MIMO with four spatial streams
  • MRC
  • 802.11ac beamforming
  • 20-, 40-, 80-, and 160-MHz channels
  • PHY data rates up to 3.47 Gbps (160 MHz with 5 GHz)
  • Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
  • 802.11 DFS
  • CSD support
  • 802.11ax
  • 4x4 downlink MU-MIMO with four spatial streams
  • Uplink/downlink OFDMA
  • TWT
  • BSS coloring
  • MRC
  • 802.11ax beamforming
  • 20-, 40-, 80-, and 160-MHz channels
  • PHY data rates up to 5.38 Gbps (160 MHz with 5 GHz and 20 MHz with 2.4 GHz)
  • Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
  • 802.11 DFS
  • CSD support
  • Interfaces: 1x 100, 1000, 2500 Multigigabit Ethernet (RJ-45)IEEE 802.3bz
  • Management console port (RJ-45), USB 2.0 3.75W (enabled via future software)
  • Indicators: Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors
  • Dimensions (W x L x H)
  • Access point (without mounting brackets): C9120I: 8.5 x 8.5 x 1.7 (21.6 x 21.6 x 4.3 cm), C9120E and C9120P: 8.5 x 8.05x 2.0 (21.6 x 21.6 x 5.1 cm)
  • Weight: Cisco Catalyst 9120I, 2.87 lbs (1.3 kg)
  • Cisco Catalyst 9120E/P, 3 lbs (1.36 kg)
  • System memory: 2048 MB DRAM, 1024 MB flash
  • Warranty: Limited lifetime hardware warranty
Cisco Catalyst 9117 Access Point dealers in hyderabad, andhra, nellore, vizag, bangalore, telangana, kerala, bangalore, chennai, india

Cisco Catalyst 9117 Access Point

  • Three radios: 2.4GHz (4x4), 5GHz (8x8), and BLE, Supports OFDMA and MU-MIMO, Internal antenna
  • Software: Cisco Unified Wireless Network Software Release 8.9 or later
  • Cisco IOS XE Software Release 16.11 or later
  • Supported wireless LAN controllers: Cisco Catalyst 9800 Series Wireless Controllers
  • Cisco 3500, 5520, and 8540 Series Wireless Controllers, and Cisco Virtual Wireless Controller
  • 802.11n version 2.0 (and related) capabilities
  • 8x8 MIMO with four spatial streams for 5 GHz band
  • 4x4 MIMO with four spatial streams for 2.4 GHz band
  • Maximal Ratio Combining (MRC)
  • 20- and 40-MHz channels
  • PHY data rates up to 600 Mbps (40 MHz with 5 GHz)
  • Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
  • Cyclic Shift Diversity (CSD) support
  • 802.11ac
  • 8x8 downlink MU-MIMO with eight spatial streams
  • MRC
  • 802.11ac beamforming
  • 20-, 40-, 80, and 160 MHz channels
  • PHY data rates up to 3.5 Gbps at 5 GHz
  • Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
  • CSD support
  • 160 MHz support only on 4 spatial stream
  • 802.11ax
  • 8x8 MIMO with eight spatial streams for 5-GHz band
  • 4x4 MIMO with four spatial streams for 2.4-GHz band
  • Downlink OFDMA
  • TWT
  • MRC
  • 802.11ax beamforming
  • 20-, 40-, 80, and 160 MHz channels
  • PHY data rates up to 5 Gbps at 5 GHz
  • Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
  • CSD support
  • Integrated antenna: 2.4 GHz, peak gain 4 dBi, internal antenna, omnidirectional in azimuth
  • 5 GHz, peak gain 6 dBi, internal antenna, omnidirectional in azimuth
  • Interfaces: 1x 100, 1000, 2500, 5000 Multigigabit Ethernet (RJ-45)IEEE 802.3bz
  • Management console port (RJ-45)
  • USB 2.0 with up to 4.5W (enabled via future software)
  • Indicators: Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors
  • Dimensions (W x L x H)
  • Access point (without mounting bracket and mounting features): 8.70 x 8.70 x 1.94 in. (22 x 22 x 4.93 cm)
  • Access point (without mounting bracket): 8.70 x 8.70 x 2.19 in. (22 x 22 x 5.56 cm)
  • Weight: 3.02 lb (1.4 kg)
  • System memory: 2048 MB DRAM, 1024 MB flash
  • Warranty: Limited lifetime hardware warranty
Cisco Catalyst 9130 Series Access Point dealers in hyderabad, andhra, nellore, vizag, bangalore, telangana, kerala, bangalore, chennai, india

Cisco Catalyst 9130 Series Access Point

  • Four radios: 2.4 GHz (4x4), 5 GHz (8x8 and 4x4), Cisco RF ASIC, and BLE/IoT
  • Cisco Flexible Radio Assignment and Cisco CleanAir Technology
  • Internal and external antenna
  • WiFi 6 certified
  • Software: Catalyst 9130 AXI: Cisco Unified Wireless Network Software Release 8.10.x or later
  • Cisco IOS XE Software Release 16.12.1 with AP Device Pack, or later
  • Catalyst 9130AXE: Cisco Unified Wireless Network Software Release 8.10MR1 or later
  • Cisco IOS XE Software Release 17.1.1 s or later
  • Supported wireless LAN controllers: Cisco Catalyst 9800 Series Wireless Controllers
  • Cisco 3504, 5520, and 8540 Wireless Controllers and Cisco Virtual Wireless Controller
  • 802.11n version 2.0 (and related) capabilities
  • 4x4 MIMO with four spatial streams
  • Maximal Ratio Combining (MRC)
  • 802.11n and 802.11a/g
  • 20- and 40 MHz channels
  • PHY data rates up to 1.5 Gbps (40 MHz with 5 GHz and 20 MHz with 2.4 GHz)
  • Packet aggregation: Aggregate MAC Protocol Data Unit (A-MPDU) (transmit and receive), Aggregate MAC Service Data Unit (A-MSDU) (transmit and receive)
  • 802.11 Dynamic Frequency Selection (DFS)
  • Cyclic Shift Diversity (CSD) support
  • 802.11ac
  • 8x8 downlink MU-MIMO with eight spatial streams
  • MRC
  • 802.11ac beamforming
  • 20-, 40-, 80-, and 160-MHz channels
  • PHY data rates up to 6.9 Gbps (160 MHz with 5 GHz)
  • Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
  • 802.11 DFS
  • CSD support
  • WPA3 support
  • 802.11ax
  • 8x8 uplink/downlink MU-MIMO with eight spatial streams
  • Uplink/downlink OFDMA
  • TWT
  • BSS coloring
  • MRC
  • 802.11ax beamforming
  • 20-, 40-, 80-, and 160-MHz channels
  • PHY data rates up to 10 Gbps (160 MHz with 5 GHz and 20 MHz with 2.4 GHz)
  • Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
  • 802.11 DFS
  • CSD support
  • WPA3 support
  • System memory: 2048 MB DRAM, 1024 MB flash
  • Interfaces
  • 1x 100, 1000, 2500, 5000 Multigigabit Ethernet (RJ-45) – IEEE 802.3az
  • Management console port (RJ-45)
  • USB 2.0 at 4.5W (enabled via future software)
  • Dimensions (W x L x H)
  • Access point (without mounting brackets):
  • C9130AXI: 8.9 x 8.9 x 1.88 in. (22.6 x 22.6 x 4.8 cm)
  • C9130AXE: 9.17 x 9.17 x 1.58 in. (23.3 x 23.3 x 4.0 cm)
  • Weight: Cisco Catalyst 9130AXI, 3.2 lb. (1.45 kg)
  • Cisco Catalyst 9130AXE, 3.78 lb. (1.71 kg)
  • Warranty: Limited lifetime hardware warranty
Cisco Embedded wireless for a Switch dealers in hyderabad, andhra, nellore, vizag, bangalore, telangana, kerala, bangalore, chennai, india

Cisco Embedded wireless for a Switch

Catalyst 9800 embedded on a Catalyst 9000 switch
Ideal for SD-Access-enabled distributed branches and small campuses
Up to 200 APs and 4 000 clients
Hot patching  time saving and hitless upgrade

Simplified device deployment
Unified management of wired and wireless networks
Network virtualization and segmentation
Group-based policies
Context-based analytics
Licensing Packaging : 

The Cisco Catalyst 9000 family of switches introduces a new and simplified licensing package in the form of base and add-on licenses.

The perpetual licensing package includes the Network Essentials and Network Advantage licensing options that are tied to the hardware. 
Between them  the base licensing packages cover switching fundamentals  management automation  troubleshooting  and advanced switching features. 
These Network licenses are perpetual.

The subscription licensing package includes the Cisco DNA Essentials and Cisco DNA Advantage options. In addition to on-box capabilities  
the features available with this package provide Cisco innovations on the switch  as well as on Cisco DNA Center. 
The Cisco DNA subscription licenses are mandatory at the time of configuration.

License consumption is easily determined by the package itself. While perpetual licenses are always permanent and without an expiration date  
subscription licenses have to be purchased for a 3-, 5-, or 7-year term (and hence are also known as term-based licenses). 
Table 12 shows the combinations of perpetual and subscription licenses that must be purchased.

Connectors and cabling

1000BASE-T ports: RJ-45 connectors  4-pair Cat 5E UTP cabling
Multigigabit-T ports: RJ-45 connectors  4-pair Cat 5E  Cat 6  Cat 6A UTP cabling
1000BASE-T SFP-based ports: RJ-45 connectors  4-pair Cat 5E UTP cabling
 SFP transceivers: LC fiber connectors (single-mode or multimode fiber)
 SFP+ transceivers: LC fiber connectors (single-mode or multimode fiber)
 QSFP+ transceivers: MPO and LC fiber connectors (single-mode or multimode fiber)
 QSFP+ connector
 SFP+ connector
 Cisco StackWise stacking ports: copper-based Cisco StackWise cabling
 Cisco StackPower: Cisco proprietary power stacking cables
 Ethernet management port: RJ-45 connectors  4-pair Cat 5 UTP cabling
 Management console port: RJ-45-to-DB9 cable for PC connections
Cisco 4000 Series Integrated Services Router dealers in hyderabad, andhra, nellore, vizag, bangalore, telangana, kerala, bangalore, chennai, india

Cisco 4000 Series Integrated Services Router

  • ISR 4221
  • GE/SFP integrated WAN ports
  • 1.2 Gbps performance
  • 75 Mbps encrypted throughput
  • Aggregate Throughput 35 Mbps to 75 Mbps
  • Total onboard WAN or LAN 10/100/1000 ports 2
  • RJ-45 based ports 2
  • SFP based ports 1
  • NIM (Network Interface Modules): slots 2
  • Onboard ISC slot No
  • Default memory double data rate 3 (DDR3) error correction code
  • (ECC) DRAM (Combined control/services/data planes): 4 GB
  • Flash Memory: 8 GB
  • Power supply: options External AC only
  • Rack height: 1 RU
  • USB console port: type B mini (up to 115.2 kbps) 0
  • Serial console port: RJ45 (up to 115.2 kbps) 1 (combo CON/AUX port)
  • Serial auxiliary port: RJ45
  • (up to 115.2 kbps)
  • 1 (combo CON/AUX port)
  • Power supply options External: AC Only
  • Redundant power supply N/A
  • AC input voltage 100 to 240 VAC autoranging
  • AC input frequency 47 to 63 Hz
  • AC input current range, AC power supply (maximum) 1.5 to 0.6A
  • AC input surge current 90 A peak and less than 3 Arms per half cycle
  • Typical power (no modules) (watts): 24
  • Maximum power with AC power supply (watts): 90
  • Maximum power with PoE power supply (platform only) (watts) NA (no PoE support)
  • Maximum endpoint PoE power available from PoE power supply (watts) NA (no PoE support)
  • Dimensions (H x W x D): 1.72 x 12.7 x 10 in (43.7 x 322.6 x 254 mm)
  • Weight with AC PS (no modules): 7.1 lb (3.22 kg)
  • ISR 4331
  • GE/SFP integrated WAN ports
  • 2 Gbps+ performance
  • 500 Mbps encrypted throughput
  • Aggregate Throughput 100 Mbps to 300 Mbps
  • Total onboard WAN or LAN 10/100/1000 ports 3
  • RJ-45 based ports: 2
  • SFP based ports: 2
  • Enhanced service module (SM-X): slot 1
  • NIM (Network Interface Modules): slots 2
  • Onboard ISC slot 1
  • Memory: 4 GB (default) / 16 GB (maximum)
  • Flash Memory: 4 GB (default) / 16 GB (maximum)
  • Power supply options Internal: AC and PoE
  • Rack height: 1 RU
  • NIM slots 2
  • OIR (all I/O modules): Yes
  • Onboard ISC slot 1
  • Default memory double data rate 3 (DDR3) error-correction-code (ECC) DRAM
  • (Combined control/services/data planes) 4 GB
  • Maximum memory DDR3 ECC DRAM (Combined control/services/data planes) 16 GB
  • Default memory DDR3 ECC DRAM (data plane) NA
  • Maximum memory DDR3 ECC DRAM (data plane) NA
  • Default memory DDR3 ECC DRAM (control/services plane) NA
  • Maximum memory DDR3 ECC DRAM (control/services plane) NA
  • Default flash memory: 4 GB
  • Maximum flash memory: 16 GB
  • External USB 2.0 slots (type A) 1
  • USB console port: type B mini (up to 115.2 kbps) 1
  • Serial console port: RJ45 (up to 115.2 kbps) 1
  • Serial auxiliary port: RJ45
  • (up to 115.2 kbps) 1
  • Power-supply options Internal: AC and PoE
  • Redundant power supply N/A
  • AC input voltage 100 to 240 VAC autoranging
  • AC input frequency 47 to 63 Hz
  • AC input current range, AC power supply (maximum) 3 to 1.3A
  • AC input surge current 60 A peak and less than 5 Arms per half cycle
  • Typical power (no modules) (watts) 42
  • Maximum power with AC power supply (watts) 250
  • Maximum power with PoE power supply (platform only) (watts) 530
  • Maximum endpoint PoE power available from PoE power supply (watts) 250
  • Dimensions (H x W x D): 44.45 x 438.15 x 438.15 mm
  • Package Weight: 12.96 Kg
  • ISR 4431
  • PoE GE/SFP, GE/SFP integrated WAN ports
  • 4 Gbps + performance
  • 900 Mbps encrypted throughput
  • Aggregate Throughput 500 Mbps to 1 Gbps
  • Total onboard WAN or LAN 10/100/1000 ports 4
  • RJ-45 based ports: 4
  • SFP-based ports: 4
  • Enhanced service module (SM-X) slot 0
  • NIM (Network Interface Modules) slots 3
  • Onboard ISC slot 1
  • DDRM (data plane): 2 GB (default) / 2 GB (maximum)
  • DDRM (control/services plane): 4 GB (default) / 16 GB (maximum)
  • Flash Memory: 8 GB (default) / 32 GB (maximum)
  • Power supply options Internal: AC, DC, and PoE
  • Rack height: 1 RU
  • Doublewide service module slots 0
  • NIM slots 3
  • OIR (all I/O modules): Yes
  • Onboard ISC slot 1
  • Default memory double data rate 3 (DDR3) error correction code (ECC) DRAM
  • (Combined control/services/data planes)NA
  • Maximum memory DDR3 ECC DRAM (Combined control/services/data planes) NA
  • Default memory DDR3 ECC DRAM (data plane) 2 GB
  • Maximum memory DDR3 ECC DRAM (data plane) 2 GB
  • Default memory DDR3 ECC DRAM (control/services plane) 4 GB
  • Maximum memory DDR3 ECC DRAM (control/services plane) 16 GB
  • Default flash memory: 8 GB
  • Maximum flash memory: 32 GB
  • External USB 2.0 slots (type A) 2
  • USB console port: type B mini (up to 115.2 kbps) 1
  • Serial console port: RJ45 (up to 115.2 kbps) 1
  • Serial auxiliary port: RJ45 (up to 115.2 kbps) 1
  • Power-supply options Internal: AC, DC, and PoE
  • Redundant power supply Internal: AC, DC, and PoE
  • AC input voltage 100 to 240 VAC autoranging
  • AC input frequency 47 to 63 Hz
  • AC input current range, AC power supply (maximum) 3 to 1.3A
  • AC input surge current 60 A peak and less than 5 Arms per half cycle
  • Typical power (no modules) (watts) 65
  • Maximum power with AC power supply (watts) 250 (no PoE)
  • Maximum power with PoE power supply (platform only) (watts) 500 with PoE redundant
  • Maximum endpoint PoE power available from PoE power supply (watts) 250 W with optional redundancy
  • Dimensions (H x W x D): 43.9 x 438.15 x 507.2 mm
  • Package Weight: 20.88 Kg
  • ISR 4461
  • 10 GE SFP+, PoE GE/SFP, GE/SFP integrated WAN ports
  • 10 Gbps+ performance
  • 7 Gbps encrypted throughput
  • Aggregate Throughput 1.5Gbps
  • Total onboard WAN or LAN 10/100/1000 ports 4
  • RJ-45 based ports: 4
  • SFP based ports: 4
  • Enhanced service module slots 3
  • Doublewide service: module slots 2
  • NIM slots 3
  • OIR (all I/O modules): Yes
  • Onboard ISC slot 1
  • SFP based ports 4
  • Enhanced service module slots 3
  • Doublewide service module slots 2
  • NIM slots 3
  • OIR (all I/O modules): Yes
  • Onboard ISC slot 1
  • Default memory double-data-rate 3 (DDR3) error-correctioncode (ECC) DRAM (Combined control/services/data planes)- Not available 
  • Maximum memory DDR3 ECC DRAM (Combined control/services/data planes)- Not available 
  • Default memory DDR3 ECC DRAM (data plane) 4 GB
  • Maximum memory DDR3 ECC DRAM (data plane) 4 GB
  • Default memory DDR3 ECC DRAM (control/services plane) 8 GB
  • Maximum memory DDR3 ECC DRAM (control/services plane) 32 GB
  • Default flash memory: 8 GB
  • Maximum flash memory: 32 GB
  • External USB 2.0 slots (type A) 2
  • USB console port: type B mini (up to 115.2 kbps) 1
  • Serial console port: RJ45 (up to 115.2 kbps) 1
  • Serial auxiliary port: RJ45 (up to 115.2 kbps) 1
  • Power-supply options Internal: AC, DC and PoE
  • Redundant power supply Internal: AC, DC and PoE
  • Dimensions (H x W x D): 3.5 x 17.25 x 18.5 in(88.9 x 438.15 x 469.9 mm)
  • Rack height 2 Rack Units (2RU)
Cisco ASR 1002 HX Router dealers in hyderabad, andhra, nellore, vizag, bangalore, telangana, kerala, bangalore, chennai, india

Cisco ASR 1002 HX Router

  • Pay as you grow performance (44 - 100 Gbps)
  • Optional field replacement and Crypto module capability of up to 25 Gbps bandwidth with performance licenses
  • Support for built in front panel 4xGE and 4x10GE; upgradeable to 8xGE amd 8x10GE with a license
  • Extendable I/O with 1 Ethernet port adapter, and 1 single wide network interface module (NIM) or 1 double wide NIM
  • Two AC or DC power supplies
  • One field replaceable fan tray for front to back airflow
  • The ASR 1002 HX is ideal for large enterprise branch offices, and as a high-performing edge solution for a private WAN It supports
  • WAN aggregation and highly secure WAN
  • Internet edge
  • Data center interconnect
  • Cisco Intelligent WAN (IWAN)
  • Scalability: 44 Gbps – 100 Gbps
  • Embedded service processor slots: Integrated
  • Route processor slots: Integrated
  • Redundancy: Software
  • Redundant power supply: Dual
  • Hitless software upgrade: Not available 
  • Programming interface: XML and CLI script
  • Management tool: Cisco Prime Network Analysis Module
Cisco 1000 Series Integrated Services Router dealers in hyderabad, andhra, nellore, vizag, bangalore, telangana, kerala, bangalore, chennai, india

Cisco 1000 Series Integrated Services Router

  • ISR 1100 4G/6G/LTE
  • Viptela OS
  • Cisco SD WAN
  • 4-6 GE WAN/LAN ports
  • ISR 1101
  • IOS XE/IOS XE SD-WAN
  • Cisco SD-WAN
  • 4 GE WAN/LAN ports
  • Pluggable LTE
  • ISR 1109
  • IOS XE/IOS XE SD WAN
  • Cisco SD WAN
  • 2-4 GE WAN/LAN ports
  • Dual pluggable LTE
  • ISR 111x
  • IOS XE/IOS XE SD WAN
  • Cisco SD WAN
  • 4-8 GE WAN/LAN ports
  • PoE
  • ISR 1111X
  • IOS XE/IOS XE SD-WAN
  • Cisco SD-WAN security
  • 8 GE WAN/LAN ports
  • PoE
  • ISR 1120
  • IOS XE/IOS XE SD WAN
  • Cisco SD-WAN security
  • 8 GE WAN/LAN ports
  • Pluggable LTE, WiFi, DSL options
  • ISR 1160
  • IOS XE/IOS XE SD-WAN
  • Cisco SD-WAN security
  • 8 GE WAN/LAN ports
  • Pluggable LTE option
Cisco Nexus 93180YC EX Switch dealers in hyderabad, andhra, nellore, vizag, bangalore, telangana, kerala, bangalore, chennai, india

Cisco Nexus 93180YC EX Switch

  • Ports : 48 x 10/25-Gbps and 6 x 40/100-Gbps QSFP28 ports
  • Downlink supported speeds : 1/10/25-Gbps speeds
  • CPU: 4 cores
  • System memory: 24 GB
  • SSD drive : 64 GB
  • System buffer: 40 MB
  • Management ports 2 ports: 1 RJ-45 and 1 SFP
  • USB ports : 1
  • RS-232 serial ports :  1
  • Power supplies (up to 2) : 650W AC, 930W DC, or 1200W HVAC/HVDC
  • Typical power (AC/DC) :  210W
  • Maximum power (AC/DC) :  470W
  • Physical dimensions c
  • (H x W x D)
  • 1.72 x 17.3 x 22.5 in.
  • (4.4 x 43.9 x 57.1 cm)
  • Weight (without power supplies or fans) 17.2 lb (7.8 kg)
  • N9K-C93180YC-EX is one of the Cisco Nexus 9300-EX switches. Cisco Nexus 9300-EX platforms are the next generation of fixed Cisco Nexus
  • 9000 Series Switches. The new platforms support cost-effective cloud-scale deployments, an increased number of endpoints, and cloud services
  • with wire-rate security and telemetry. The platforms are built on modern system architecture designed to provide high performance and meet
  • the evolving needs of highly scalable data centers and growing enterprises.
Cisco Nexus 93180LC EX Switch dealers in hyderabad, andhra, nellore, vizag, bangalore, telangana, kerala, bangalore, chennai, india

Cisco Nexus 93180LC EX Switch

  • Device Type : Switch - 24 ports - L3
  • Enclosure Type : Rack-mountable 1U
  • Subtype : 50 Gigabit Ethernet
  • Ports : 24 x 40/50 Gigabit QSFP+ + 6 x 40/100 Gigabit QSFP+
  • Performance : Bandwidth: 3.6 Tbps ¦ Active SPAN sessions: 4
  • Capacity : Multiple Spanning Tree Protocol instances: 64 ¦ HSRP groups: 490 ¦ 
  • Per VLAN Rapid Spanning Tree instances: 4000 ¦ Maximum number of links in a port channel: 32 ¦ Maximum number of port channels: 512 ¦ ECMP paths: 64 ¦ Virtual Routing and Forwarding (VRF) instances: 1000 ¦ VLANs supported: 4096 ¦ ACL entries (egress): 2000 ¦ ACL entries (ingress): 4000 ¦ IGMP snooping groups: 8000 ¦ Multicast routes: 8000
  • MAC Address Table Size : 512K entries
  • Routing Protocol :OSPF, RIP, RIP-2, BGP, EIGRP, HSRP, PIM-SM, MSDP, ECMP, MPLS
  • Features : Layer 3 switching, High Availability, hot swappable 4 fans, Virtual PortChannel (vPC) technology, In-Service Software Upgrade (ISSU), NPV Gateway mode, Virtual Extensible LAN (VXLAN), Source-Specific Multicast (SSM), Ethernet Virtual Private Network (EVPN), 40MB system buffer
  • RAM : 24 GB
  • Built-in Devices : 64 GB SSD
  • The Cisco Nexus 93180LC-EX Switch is the industry's first 50-Gbps capable 1RU switch that supports 3.6 Tbps of bandwidth and over 2.6 
  • bpps across 24 fixed 40/50-Gbps QSFP+ ports. Ports numbered 25, 27, 29, 30, 31, and 32 are the 6 uplinks ports, which can be configured 
  • as 40- and 100-Gbps ports, offering flexible migration options. This switch is capable of supporting flexible port configurations.
Cisco Nexus 9316D GX Switch dealers in hyderabad, andhra, nellore, vizag, bangalore, telangana, kerala, bangalore, chennai, india

Cisco Nexus 9316D GX Switch

  • Ports :  16 x 400/100/40-Gbps QSFP-DD ports
  • System memory :  16 GB NX-OS, 24 GB ACI
  • Solid-State Disk (SSD) :  128 GB
  • USB  1 port
  • RS-232 serial console ports 1
  • Management ports 2 (1 x 10/100/1000BASE-T and 1 x 1-Gbps SFP+)
  • Broadwell-DE CPU 4 cores
  • Dimensions (H x W x D) 3.38 x 17.37 x 22.27 in. (8.59 x 44.13 x 56.58 cm)
  • N9K-C9316D-GX is the Cisco Nexus 9316D Spine switch with 16p 400/100G QSFP-DD. Based on Cisco® Cloud Scale technology, the Cisco
  • Nexus® 9300-GX switches are the next generation of fixed Cisco Nexus 9000 Series Switches. The platform introduces a fully backwardcompatible 400G optical interface Quad Small Form-Factor Pluggable – Double Density (QSFP-DD) to transparently migrate existing data center
  • fabrics from 40-Gbps and 100-Gbps speeds to 400 Gbps. The platform provides investment protection for customers, delivering highly flexible
  • layer 2 and layer 3 scalability, and performance to meet the changing needs of virtualized data centers and automated cloud environments.
Cisco Nexus 93600CD Switch dealers in hyderabad, andhra, nellore, vizag, bangalore, telangana, kerala, bangalore, chennai, india

Cisco Nexus 93600CD Switch

  • Ports  : 28 x 100/40-Gbps QSFP28 ports and 8 x 400/100-Gbps QSFP-DD ports
  • System memory :  16 GB NX-OS, 24 GB ACI
  • Solid-State Disk : (SSD) 128 GB
  • USB : 1 port
  • RS-232 serial console ports  : 1
  • Management ports : 2 (1 x 10/100/1000BASE-T and 1 x 1-Gbps SFP+)
  • Broadwell-DE CPU  : 4 cores
  • Dimensions (H x W x D) 1.72 x 17.37 x 25.5 in. (4.37 x 44.13 x 64.8 cm)
  • N9K-C93600CD-GX is the Cisco Nexus 9316D Spine and Leaf switch with 28p 100/40G QSFP28 and 8p 400/100G QSFP-DD. Based on Cisco
  • Cloud Scale technology, the Cisco Nexus 9300-GX switches are the next generation of fixed Cisco Nexus 9000 Series Switches. The platform
  • introduces a fully backward-compatible 400G optical interface Quad Small Form-Factor Pluggable – Double Density (QSFP-DD) to transparently
  • migrate existing data center fabrics from 40-Gbps and 100-Gbps speeds to 400 Gbps. The platform provides investment protection for
  • customers, delivering highly flexible layer 2 and layer 3 scalability, and performance to meet the changing needs of virtualized data centers and
  • automated cloud environments.
Cisco Nexus 9504 Switch dealers in hyderabad, andhra, nellore, vizag, bangalore, telangana, kerala, bangalore, chennai, india

Cisco Nexus 9504 Switch

Features and Capabilities
The Cisco Nexus 9504 Switch offers a comprehensive feature set, high resiliency, and a broad range of high performance Gigabit Ethernet line cards. It can meet the most demanding requirements of enterprise, service provider, and cloud data centers.

Deployment Flexibility
Support for the next-generation data center based on Cisco ACI
Nexus Fabric Manager support to automate fabric configuration and management
Traditional data centers in standalone NX-OS mode

Programmability
Open API to manage the switch through remote-procedure calls (JavaScript Object Notation or XML) over HTTP or HTTPS
Automated configuration through Linux shell scripts
Support for customer applications through a Linux container environment
Programmable APIs for integration with DevOps automation tools

High Availability
In-Service Software Upgrade (ISSU) and patching without operation interruption Redundant and hot-swappable supervisors, system controllers, power supplies, and fan trays
Mix of third-party and Cisco application-specific integrated circuits (ASICs) for improved reliability

Energy Efficiency
Designed without a midplane to optimize front-to-back airflow and reduce power consumption
Optimized design with fewer ASICs, resulting in lower energy use
Efficient power supplies that are rated at 80 Plus Platinum
 

Nonblocking performance 15 Tbps
10 Gigabit Ethernet nonblocking ports Up to 512
25 Gigabit Ethernet Ports Up to 512
50 Gigabit Ethernet Ports Up to 256
40/100 Gigabit Ethernet nonblocking ports Up to 144
1/10GBASE-T nonblocking ports Up to 192
Form factor 7-rack-unit chassis
Line card slots 4
Airflow Front to back
Cisco Nexus 9508 Switch dealers in hyderabad, andhra, nellore, vizag, bangalore, telangana, kerala, bangalore, chennai, india

Cisco Nexus 9508 Switch

Features and Capabilities
The Cisco Nexus 9508 Switch offers a comprehensive feature set, high resiliency, and a broad range of 1/10/40 Gigabit Ethernet line cards to meet the most
demanding requirements of enterprise, service provider, and cloud data centers.

ACI Support
Designed to support the Cisco next-generation data center based on Cisco ACI

Programmability
Open API to manage the switch through remote-procedure calls (JavaScript Object Notation or XML) over HTTP or HTTPS
Automated configuration through Linux shell scripts
Support for customer applications through a Linux container environment

High Availability
Full Cisco In-Service Software Upgrade (ISSU) and patching support
Redundant and hot-swappable supervisors, system controllers, power supplies, and fan trays
Mix of third-party and Cisco application-specific integrated circuits (ASICs) for improved reliability

Energy Efficiency
Design without a midplane to optimize front-to-back airflow and reduce power consumption
Optimized design with fewer ASICs, resulting in lower energy use
Efficient power supplies that are rated at 80 Plus Platinum

Specifications at a Glance
30 Tbps of nonblocking performance
Up to 1152 10 Gigabit Ethernet nonblocking ports
Up to 288 40 Gigabit Ethernet nonblocking ports
Up to 384 1/10GBASE-T nonblocking ports
13-rack-unit chassis
8 line card slots
Front-to-back airflow
Cisco Nexus 9516 Switch dealers in hyderabad, andhra, nellore, vizag, bangalore, telangana, kerala, bangalore, chennai, india

Cisco Nexus 9516 Switch

Features and capabilities: 
The Cisco Nexus 9516 Switch offers a comprehensive feature set, high resiliency, 
and a broad range of 1/10/40 Gigabit Ethernet line cards. It can meet the most demanding requirements of enterprise, service provider, and cloud data centers.

Cisco ACI support
Designed to support the Cisco next-generation data center based on Cisco ACI

Programmability
Open API to manage the switch through remote-procedure calls (JavaScript Object Notation or XML) over HTTP or HTTPS
Automated configuration through Linux shell scripts
Support for customer applications through a Linux container environment

High availability
Software patching for continued operations
Redundant and hot-swappable supervisors, system controllers, power supplies, and fan trays
Mix of third-party and Cisco application-specific integrated circuits (ASICs) for improved reliability

Energy efficiency
Design without a midplane to optimize front-to-back airflow and reduce power consumption
Optimized design with fewer ASICs, resulting in lower energy use
Efficient power supplies that are rated at 80 Plus Platinum

Investment protection
40 Gb  for reuse of existing 10 Gigabit Ethernet multimode cabling plant for 40 Gigabit Ethernet
Support for Cisco NX-OS and Cisco ACI modes of operation
Support for Cisco Nexus 2000 Series Fabric Extenders

Form factor : 21 RU
Line card slots : 16
Supervisor slots : 2
Fabric module slots : 6
ACI support :Yes
Bandwidth per slot (Tbps) : 3.84
Bandwidth per system (Tbps) : 60
Maximum number of 1/10G BASE-T ports : 768
Maximum number of 10 GE ports : 2304
Maximum number of 40 GE ports : 576
Maximum number of 100GE ports : 576
Airflow : Front to back
Power supplies (3-kW AC/DC) : Up to 10
Fan trays : 3
Cisco MGX XM60 Switching Module dealers in hyderabad, andhra, nellore, vizag, bangalore, telangana, kerala, bangalore, chennai, india

Cisco MGX XM60 Switching Module

Key feattures :
The Cisco MGX-XM60 Switching Module has the following primary features:
Single-height card
60-Gbps nonblocking crosspoint switch fabric
Dynamic sharing of capacity across multiple Cisco XM-60s, allowing for N + 1 redundancy
Four installed in each Cisco MGX 8950 for 240-Gbps total capacity, 180-Gbps redundant capacity
Hot card insertion/removal
Complete separation from control processor, allowing data forwarding in the event of control card failure

Chassis compatibility
MGX 8950

Software compatibility
MGX S/W Releases supporting MGX-XM60:
MGX Rls 4.0.15 and above

Network management
Managed by Cisco WAN Manager Software suite
Based on Simple Network Management Protocol (SNMP)

Power
Input power required: -48 VDC
Power consumption: 61 W

Physical dimensions
H x D: 7.25 x 16.5 in. (18.41 x 41.91 cm)

Weight
3.5 lb
Cisco MGX 8800 Hardware Installation Switch dealers in hyderabad, andhra, nellore, vizag, bangalore, telangana, kerala, bangalore, chennai, india

Cisco MGX 8800 Hardware Installation Switch

Key Features
The main features of the Cisco 8-Port OC-12/STM-4 Channelized/Unchannelized ATM Switch Service Module are listed here.
Full nonblocking, full-duplex line-rate throughput on all 8 ports when used on the Cisco MGX 8950 chassis
Up to 4 ports with nonblocking, full-duplex line-rate throughput when used on the Cisco MGX 8800 chassis
Individual port channelization down to DS-3 and OC-3c/STM-1
Per-virtual-path and per-virtual-circuit traffic shaping and available bit rate (ABR) with virtual source and virtual destination
APS (1:1 and 1+1) port redundancy, plus APS 1+1 card redundancy
Up to 4 million cell buffers
Up to 16 classes of service (CoS) that can be used to support IP or ATM services
Support for standards-based Private Network-to-Network Interface (PNNI), switched virtual circuit (SVC) and switched virtual path (SVP), 
soft permanent virtual connection (SPVC) and soft permanent virtual path (SPVP), and Multiprotocol Label Switching (MPLS) services

Chassis Compatibility
Cisco MGX 8830/B, MGX 8850, MGX 8850/B, MGX 8880, and MGX 8950

Software Compatibility
Cisco MGX 8800/8900 Software Release 5.2.00 and above for Cisco MGX 8830/B, MGX 8850, MGX 8850/B, and MGX 8950
Cisco MGX 8800/8900 Software Release 5.3.00 and above for Cisco MGX 8880

Protocols
ATM and SONET/SDH

Port Density
8 ports (4 ports at full line rate on the Cisco MGX 8800 chassis)

Network Management
Managed by Cisco WAN Manager software suite
Based on Simple Network Management Protocol (SNMP)

Power
Input power required: -48 VDC
 Power consumption: 134W

Physical Dimensions
H x D: 15.83 x 15.65 in. (40.20 x 39.75 cm)

Weight
6.5 lb (2.95 kg)
Cisco MGX 8850 PXM 45 Processor Switch Module dealers in hyderabad, andhra, nellore, vizag, bangalore, telangana, kerala, bangalore, chennai, india

Cisco MGX 8850 PXM 45 Processor Switch Module

Key Features
64-bit MIPS-based processor operating at 700 MHz
45-Gbps switch fabric and 1.2-Gbps cell-bus (when used with chassis other than the Cisco MGX 8950)
Cisco PXM-45/C used only as processor in Cisco MGX 8950; Cisco MGX-XM-60 provides switch-fabric function in that chassis
Hot swappable
1:1 hot-standby redundancy
User-selectable primary and secondary clock sources with graceful switchover
Internal Stratum-3, external Building Integrated Timing Supply (BITS), or in-band clock sources
In-band or out-of-band management using EIA/TIA-232 or 10BASE-T control ports
Support for narrowband and broadband service modules scaling from DS-0 to OC-48c/STM-16 or DS-3/E3 to OC-192/STM-64 (depending on the chassis used)

Chassis compatibility
Cisco MGX 8830/B, MGX 8850, MGX 8850/B, MGX 8880, and MGX 8950

Software compatibility
Minimum Cisco MGX software release supporting Cisco PXM-45/C:
Cisco MGX 8850 Software Release 4.0.15
Cisco MGX 8950 Software Release 4.0.15
 Cisco MGX Software Release 5.0.20 (for Cisco MGX 8880 and MGX 8850/B)
Cisco MGX Software Release 5.2.00 (for Cisco MGX 8830/B)

Network Management
 Managed by Cisco WAN Manager Software suite
 Based on Simple Network Management Protocol (SNMP)

Power
Input power required: -48 VDC
Power consumption: 128 W

Physical Dimensions
H x D: 15.75 x 16.5 in. (40.00 x 41.91 cm)

Weight
6.5 lbs
Cisco MGX 8800 Series Switches dealers in hyderabad, andhra, nellore, vizag, bangalore, telangana, kerala, bangalore, chennai, india

Cisco MGX 8800 Series Switches

Key Features: 
The main features of the Cisco MGX 8800/8900 16-Port OC-3c/STM-1 ATM Switch Service Module are listed here.
Full nonblocking, full-duplex line-rate throughput on all 16 ports
High reliability with hot-standby 1+1 16-port ATM switch service module card redundancy
Per-virtual-path and per-virtual-circuit traffic shaping and available bit rate (ABR) with virtual source and virtual destination
Y-cable and APS (1:1 and 1+1) port redundancy, plus APS 1+1 card redundancy
Up to 4 million cell buffers
Up to 16 classes of service (CoS) that can be used to support IP or ATM services
Support for standards-based Private Network-to-Network Interface (PNNI), switched virtual circuit (SVC) and switched virtual path (SVP), soft permanent virtual connection (SPVC) and soft permanent virtual path (SPVP), and Multiprotocol Label Switching (MPLS) services

Chassis Compatibility: 
Cisco MGX 8830/B, MGX 8850, MGX 8850/B, and MGX 8950

Software Compatibility: 
Cisco MGX 8800/8900 SW Release 5.0.20 and above

Protocols : 
ATM and SONET/SDH

Port Density : 
16 ports

Network Management
 Managed by Cisco WAN Manager software suite
 Based on Simple Network Management Protocol (SNMP)

Power
Input power required: -48 VDC
Power consumption: 114W

Physical Dimensions
H x D: 15.83 x 15.65 in. (40.20 x 39.75 cm)

Weight
6.5 lb (2.95 kg)
Cisco MGX 8850 AXSM Broadband ATM Switching Module dealers in hyderabad, andhra, nellore, vizag, bangalore, telangana, kerala, bangalore, chennai, india

Cisco MGX 8850 AXSM Broadband ATM Switching Module

AXSM can be used in the MGX 8850 to provide ATM capability up to OC-48c/STM-16.
High scalability in interface speeds with T3/E3 ports, OC-3c/STM-1, OC-12c/STM-4, and OC-48c/ STM-16 AXSM modules. Each port on the AXSM can be configured for either trunk or access applications.
Industry leading module port densities of 16 T3/E3 ports, 16 OC-3c/STM-1 ports, 4 OC-12c/STM-4 ports, and 1 OC-48c/ STM-16 port that can scale up to 12 OC-48c/STM-16 modules in each MGX 8850 Multiservice Switch. Each OC-48c/STM-16 delivers fully nonblocking, full duplex throughput, in which a connection can occupy the entire line rate.
Support for all ATM service classes, with up to 16 classes of service (CoS). Supports carrier-class implementation of standards-based PNNI, SVC/SVP, SPVC/SPVP, and MPLS services. Large cell buffers (one million cells), which help to maximize "goodput" performance during congestion, reducing the number of retransmits; the buffers are allocated dynamically, depending on connection resource needs, thereby optimizing use of system resources.
High reliability with hot-standby 1:1 AXSM card redundancy, 1:1 and 1+1 line redundancy using APS.

Ports and trunks supported on same AXSM module
User-Network Interface (UNI) Specifications 3.0, 3.1, 4.0

Network Management
Management using Cisco WAN Manager software suite
Based on Simple Network Management Protocol (SNMP)

Physical Specifications
Dimensions: (H x D) 15.83 x 15.65 in.

Electrical Specifications
Input power required: -48 VDC
Power consumption: 95W
Cisco MGX 8950 Multiservice Switch dealers in hyderabad, andhra, nellore, vizag, bangalore, telangana, kerala, bangalore, chennai, india

Cisco MGX 8950 Multiservice Switch

Applications
High-density broadband ATM
Scaling MPLS services
Convergence of voice and data networks

Technical Specifications

The following are some of the key features of the Cisco MGX 8950 Multiservice Switch:
Scalability of up to 180-Gbps fully redundant nonblocking switching within a single chassis

10-Gbps ATM interfaces (OC-192c/STM-64)
 
Industry-leading broadband density

OC-3c/STM-1, OC-12c/STM-4, and OC-48c/STM-16 trunk aggregation

Industry's highest network availability

Software compatibility
 MGX 4.0.15 release and later (depending on the service modules configured)

Service module compatibility
AXSM-16-155-XG, AXSM-8-622-XG, AXSM-4-2488-XG, AXSM-1-9953-XG
AXSM-16-T3E3/B, AXSM-1-2488/B
MGX-RPM-PR-256, MGX-RPM-PR-512, MGX-RPM-XF-512

Control card
PXM45/C Processor Switching Module (only processor function is used)
Redundant slots 7 and 8 reserved for control card

Slots
Control processor slots: 2 fixed double-height slots for primary and secondary
Switching card slots: 2 fixed double-height slots divided into 4 single-height slots for 4 load-sharing XM60 switching cards
Service module slots: 12 double-height slots

Connectivity
T3/E3, OC-3/STM1, OC-12/STM-4, OC-48/STM-16, OC-192/STM-64, POS, Ethernet, Fast Ethernet, Gigabit Ethernet

Network management interfaces
RJ-45 Ethernet port for the management interface at the node, and In-band ATM connection to reach remote node for management connectivity,
DB-15 for the visual and audible alarm port, a command-line interface (CLI) for local management, 
Simple Network Management Protocol (SNMP) for the network management system interface, Secure File Transfer Protocol (SFTP) for file transfer,
and Secure Shell (SSHv1 and SSHv2) Protocol for remote CLI access

Physical dimensions
(H x W x D): 35 x 19 x 22 inches (88.9 x 48.26 x 55.88 cm)
Rack-mountable in 19- and 23-inch EIA/RETMA and ETSI racks

Power
Typical consumption: 5 kW for maximum configuration system
Cisco MGX 8800 Series 16 Port Switch dealers in hyderabad, andhra, nellore, vizag, bangalore, telangana, kerala, bangalore, chennai, india

Cisco MGX 8800 Series 16 Port Switch

Key Features

The main features of the Cisco MGX 8950 OC-192c/STM-64 ATM Switch Service Module are listed here.
Full nonblocking, full-duplex line-rate throughput

High reliability with hot-standby 1+1 ATM switch service module card redundancy

Per-virtual-path and per-virtual-circuit traffic shaping and available bit rate (ABR) with virtual source and virtual destination

Up to 4 million cell buffers

Up to 16 classes of service (CoS) that can be used to support IP or ATM services

Support for standards-based Private Network-to-Network Interface (PNNI), switched virtual circuit (SVC) and switched virtual path (SVP), 
soft permanent virtual connection (SPVC) and soft permanent virtual path (SPVP), 
and Multiprotocol Label Switching (MPLS) services


Chassis Compatibility : 
Cisco MGX 8950

Software Compatibility : 
Cisco MGX Software Release 4.0.15 and above

Protocols : 
ATM and SONET/SDH

Port Density : 
1 port

Layer 1 (Physical Layer) Feature Summary
User-Network Interface (UNI) 3.0, 3.1, and 4.0 physical layer specifications
Compliance with the following SONET standards:
Bellcore GR-253-CORE
ANSI T1.105
Compliance with the following SDH standards:
ITU-T G.707, G.708, G.709, and G.783
ITU-T G.957 and G.958
Additional Physical Layer Specifications for Ports and Optics

Network Management : 
Managed by Cisco WAN Manager software suite
Based on Simple Network Management Protocol (SNMP)

Power : 
Input power required: -48 VDC
Power consumption: 205W

Physical Dimensions : 
H x D: 15.83 x 15.65 in. (40.20 x 39.75 cm)

Weight : 
6.5 lb (2.95 kg)
Cisco Industrial Wireless 3700 Series dealers in hyderabad, andhra, nellore, vizag, bangalore, telangana, kerala, bangalore, chennai, india

Cisco Industrial Wireless 3700 Series

Industrial  outdoor 802.11ac wireless.
Designed and certified for extreme environments.
Rail - rolling stock  shock and vibration certified.
Chipset with best-in-class RF architecture.

Software
Cisco Unified Wireless Network Software Release with AireOS Wireless Controllers:
8.0.120.0 or later for the Cisco IW3700 Series Access Point
Cisco IOS Software Release
 15.3(3)JA5 or later for the Cisco IW3700 Series Access Point

802.11ac Wave 1 capabilities

  4 x 4 MIMO with 3 spatial streams
  Maximal-Ratio Combining (MRC)
  802.11ac beamforming
  20- 40- and 80-MHz channels
  PHY data rates up to 1.3 Gbps (80 MHz with 5 GHz)
  Packet aggregation: A-MPDU (Tx/Rx) A-MSDU (Tx/Rx)
  802.11 Dynamic Frequency Selection (DFS)
  Cyclic Shift Diversity (CSD) support

802.11n version 2.0 (and related) capabilities

4 x 4 MIMO with 3 spatial streams
  Maximal-Ratio Combining (MRC)
 802.11n and 802.11a/g beamforming
  20- and 40-MHz channels
 PHY data rates up to 450 Mbps (40 MHz with 5 GHz)
 Packet aggregation: A-MPDU (Tx/Rx) A-MSDU (Tx/Rx)
 802.11 Dynamic Frequency Selection (DFS)
 Cyclic Shift Diversity (CSD) support

Data rates supported
802.11a: 6  9  12  18  24  36  48  and 54 Mbps
802.11g: 1  2  5.5  6  9  11  12  18  24  36  48  and 54 Mbps

Interfaces

 10/100/1000BASE-T autosensing (M12 8P female connector with X-coding per IEC 61076-2) PoE In (802.3af) PoE+ In (802.3at)
 10/100/1000BASE-T autosensing (M12 8P female connector with X-coding per IEC 61076-2) PoE Out (802.3af)
 Management console port (serial with RJ-45 connector)

Indicators
 Status LED indicates boot loader status  association status  operating status  boot loader warnings  boot loader errors

System memory
 512 MB DRAM
 64 MB flash

Dimensions (W x L x H)
 Access point (not including connectors): 11.3 x 8.0 x 2.3 in (28.7 x 20.3 x 5.9 cm)
 Volume: 148 cubic inches (2.4 liters)

Weight
  6.7 lb (3.0 kg)

Warranty
5-year limited hardware warranty
Cisco Catalyst 9800 L Wireless Controller dealers in hyderabad, andhra, nellore, vizag, bangalore, telangana, kerala, bangalore, chennai, india

Cisco Catalyst 9800 L Wireless Controller

For small campus deployments with the flexibility of copper or fiber uplinks
Up to 250 APs  5000 clients  and 5-Gbps throughput
Hot patching  time saving and hitless upgrades
Advanced  on demand telemetry

The Cisco Catalyst 9800-L is a fixed wireless controller with seamless software updates for small and midsize enterprises.

Built from the ground up for intent-based networking  the Cisco Catalyst 9800 L brings together
Cisco IOS XE Software and Cisco RF excellence to create a best in-class wireless experience for your evolving and growing organization

The Cisco Catalyst 9800-L is feature rich and enterprise ready to power your business-critical operations and transform end-user experiences:
Choose between copper and fiber uplinks. This choice gives you flexibility in your network.

High availability and seamless software updates  enabled by hot and cold patching  
keep your clients and services always on in planned and unplanned events.

Secure the air  devices  and users with the Cisco Catalyst 9800-L. 
The wireless infrastructure becomes the strongest first line of defense  
with Encrypted Traffic Analytics and Software-Defined Access (SD-Access). The controller comes with built-in security: Secure Boot  
runtime defenses  image signing  integrity verification  and hardware authenticity.

Built on a modular operating system  the controller features open and programmable APIs that enable automation of day-0 to day-N network operations.
 Model-driven streaming telemetry provides deep insights into your network and client health.

Maximum number of access points:250  500 (with performance license)
Maximum number of clients : 5000  10000 (with performance license)
Maximum throughput : 5 Gbps  10 Gbps(with performance license)
Maximum WLANs : 4096
Maximum VLANs : 4096
Fixed uplinks : 2x 10G/Multigigabit copper or 2x 10G/Multigigabit fiber
Power supply : 110W  12VDC  AC/DC adapter
Maximum power consumption : 9800-L-C: 86.9W (with 4.5W USB load) / 9800-L-F: 84.5W (assumes 2pc 2.5W SFP and with 4.5W USB load)
Deployment modes : Centralized  Cisco FlexConnect  and fabric 
Form factor : 1RU; half-width chassis allows side-by-side installation in standard 19-in. rack
License : Smart License enabled
Software : Cisco IOS XE
Management : Cisco DNA Center  Cisco Prime Infrastructure  and third party (open standards APIs)
Interoperability : AireOS-based controllers
Access points : Cisco Aironet 802.11ac Wave 1 and Wave 2 access points  Cisco Catalyst 9100 802.11ax access points
Dimesnsion : 
Width : 8.5 in. (21.59 cm) 
Depth : 9.06 in. (23.01 cm)
Height : 1.58 in. (4.02 cm)
Weight : C9800-L-C: 3.95 lb. (1.79 kg)
C9800-L-F: 4.01 lb. (1.82 kg)
Cisco Catalyst 9800 40 Wireless Controller dealers in hyderabad, andhra, nellore, vizag, bangalore, telangana, kerala, bangalore, chennai, india

Cisco Catalyst 9800 40 Wireless Controller

For medium-sized campus deployments
Up to 2000 APs  32 000 clients  and 40-Gbps throughput
Hot patching  time saving and hitless upgrades
Advanced  on-demand telemetry

 High availability and seamless software updates  enabled by hot and cold patching  
keep your clients and services always on during planned and unplanned events.

Secure air  devices  and users with the Cisco Catalyst 9800-40. Wireless infrastructure becomes the strongest first line of defense with Cisco Encrypted 
Traffic Analytics (ETA) and Software-Defined Access (SD-Access). The controller comes with built-in security: secure boot  runtime defenses 
image signing  integrity verification  and hardware authenticity.

Built on a modular operating system  the 9800-40 features open and programmable APIs that enable automation of day-0 to day-N network operations. 
Model-driven streaming telemetry provides deep insights into the health of your network and clients.

Maximum number of access points : Up to 2000
Maximum number of clients : 32 000
Maximum throughput : Up to 40 Gbps
Maximum WLANs : 4096
Maximum VLANs : 4096
Max Site Tags : 2000
Max Flex APs per Site : 100
Max Policy Tags : 2000
Max RF Tags : 2000
Max RF Profiles : 4000
Max Policy Profiles : 1000
Max Flex Profiles : 2000
Interfaces : 4x 10 GE/1 GE SFP+/SFP
Power supply : AC power with optional redundant AC power
Maximum power consumption : 381W
Deployment modes : Centralized  Cisco FlexConnect  and Fabric Wireless (SD-Access)
Form factor:1RU
License : Smart License enabled
Operating system : Cisco IOS XE
Management : Cisco DNA Center  Cisco Prime Infrastructure  integrated WebUI  and third party (open standards APIs)*
Interoperability ; AireOS-based controllers*
Policy engine : Cisco Identity Services Engine (ISE)*
Location Platform : Cisco Connected Mobile Experiences (CMX)/ Cisco DNA Spaces *
Access points : Aironet 802.11ac Wave 1 and Wave 2 access points  Catalyst 9100 802.11ax access points
Width : 17.3 inches (43.94 cm)
Depth : 19.5 inches (49.53 cm)
Height : 1.72 inches (4.37 cm)
Weight : 22.8 lb (10.34 kg)
Hard Disk Drives (HDD) :  SATA Solid-State Drive (SSD)
240GB of memory
Cisco Catalyst 9800 80 Wireless Controller dealers in hyderabad, andhra, nellore, vizag, bangalore, telangana, kerala, bangalore, chennai, india

Cisco Catalyst 9800 80 Wireless Controller

High availability and seamless software updates  enabled by hot patching  keep your clients and services always on in planned and unplanned events.

Secure air  devices  and users with the Cisco Catalyst 9800-80. Wireless infrastructure becomes the strongest first line of defense with Cisco Encrypted Traffic Analytics (ETA) and Software-Defined Access (SD-Access).
The controller comes with built-in security: secure boot  runtime defenses  image signing  integrity verification  and hardware authenticity.

Built on a modular operating system  the 9800-80 features open and programmable APIs that enable automation of day-0 to day-N network operations.
Model-driven streaming telemetry provides deep insights into the health of your network and clients.

Maximum number of access points : Up to 6000
Maximum number of clients : 64 000
Maximum throughput : Up to 80 Gbps
Maximum WLANs : 4096
Maximum VLANs : 4096
Max site tags : 6000
Max Flex APs per site : 100
Max policy tags : 6000
Max RF tags : 6000
Max RF profiles : 12000
Max policy profiles : 1000
Max flex profiles : 6000
Fixed uplinks : 8x 10 GE or 6x 10 GE + 2x 1 GE SFP+/SFP
Modular uplinks (optional)

The supported uplink modules are
 C9800-18X1GE(=)
 C9800-10X10GE(=)
 C9800-1X40GE(=)
 C9800-2X40GE(=)
 C9800-1X100GE(=)
The uplink modules are hot-swappable.
Supports 10 GE  40 GE  and 100 GE QSFP transceivers
Redundant power supply : AC or DC power supply
Maximum power consumption with modules 600W
Deployment modes : Centralized  Cisco FlexConnect®  and Fabric Wireless (SD-Access)
Form factor : 2RU
License : Smart License enabled
Operating system : Cisco IOS XE
Management : Cisco DNA Center  Cisco Prime Infrastructure  integrated WebUI  and third party (open standards APIs)
Interoperability : AireOS-based controllers
Policy engine : Cisco Identity Services Engine (ISE)
Location platform : Cisco Connected Mobile Experiences (CMX)/Cisco DNA Spaces*
Access points : Aironet 802.11ac Wave 1 and Wave 2 access points  Catalyst 9100 802.11ax access points
Width : 17.3 inches (43.94 cm)
Depth : 20.5 inches (52.07 cm)
Height : 3.47 inches (8.81 cm)
Weight : 31.5 lb (14.29 kg)
Hard Disk Drives (HDD) :   SATA solid-state drive (SSD)
 240 GB of memory
Cisco Catalyst 9800 CL Wireless Controller dealers in hyderabad, andhra, nellore, vizag, bangalore, telangana, kerala, bangalore, chennai, india

Cisco Catalyst 9800 CL Wireless Controller

Deploy in private or public (AWS) cloud
Up to 6000 APs and 64 000 clients
Hot patching  time saving and hitless upgrades
Advanced  on-demand telemetry

High availability and seamless software updates  enabled by hot and cold patching  keep your clients and services always on in planned and unplanned events.

Secure air  devices  and users with the Cisco Catalyst 9800-CL. Wireless infrastructure becomes the strongest first line of defense with Cisco Encrypted Traffic Analytics (ETA) and Software-Defined Access (SD-Access). 
The controller comes with built-in security: runtime defenses  image signing and integrity verification.
 
Deploy anywhere to enable wireless connectivity everywhere. Whether in a public or private cloud  the Cisco Catalyst 9800-CL best meets your organization’s needs.

Built on a modular operating system  the 9800-CL features open and programmable APIs that enable automation of day-0 to day-N network operations. Model-driven streaming telemetry provides deep insights into the health of your network and clients.

Maximum number of access points : Up to 6000
Maximum number of clients : 64 000
Maximum throughput : Up to 2.2 Gbps*
Maximum WLANs : 4096
Maximum VLANs : 4096
Deployment modes : Centralized  Cisco FlexConnect and Fabric Wireless (SD-Access)
License : Smart License enabled
Operating system : Cisco IOS XE Software
Management : Cisco DNA Center  Cisco Prime Infrastructure  integrated WebUI  and third party (open standards APIs)
Interoperability : AireOS-based controllers
Policy engine : Cisco Identity Services Engine
Location platform : Cisco Connected Mobile Experiences (CMX) / DNA Spaces
Access points : Aironet 802.11ac Wave 1 and Wave 2  Catalyst 9100 802.11ax access points
Cisco Embedded Wireless Controller on Catalyst Aaccess Point dealers in hyderabad, andhra, nellore, vizag, bangalore, telangana, kerala, bangalore, chennai, india

Cisco Embedded Wireless Controller on Catalyst Aaccess Point

Catalyst 9800 embedded on a Catalyst 9100 access point
Ideal for distributed branches and small campuses
Up to 100 APs and 2 000 clients
Hot patching  time saving and hitless upgrades

The Cisco Embedded Wireless Controller on Catalyst® Access Points (EWC-AP) is the next-generation Wi-Fi solution  combining the most advanced controller – the Cisco Catalyst 9800 Series Wireless Controllers – with the latest Wi-Fi 6 access points – the Cisco Catalyst 9100 Access Points – creating a best-in-class wireless experience for your evolving and growing organization.

With the 9800 Series wireless controller embedded on the Cisco Catalyst 9100 Access Points  organizations can now benefit from enterprise-class resiliency  security  and IT simplicity for single or multisite enterprise deployments.

Built for intent-based networking and Cisco DNA  the EWC-AP helps you simplify complexity  optimize IT  and reduce operational costs by leveraging intelligence  automation  and human expertise that no other vendor can deliver  regardless of where you are in the intent-based networking journey.


Maximum number of access points : Up to 100
Maximum number of clients : Up to 2000
Maximum number of WLANs :16
Deployment modes:Cisco FlexConnect®
Maximum FlexConnect APs per site :100
License :Smart License enabled
Operating system : Cisco IOS® XE Software
Management : Cisco DNA Center 1.3.2  integrated WebUI  mobile app  and third party (open standards APIs)
Policy engine : Cisco Identity Services Engine (ISE) 2.2  2.3  and 2.4
Access points : Cisco Catalyst 9100 Access Points and Aironet® 802.11ac Wave 2 access points (operating in client serving mode only)
Warranty information : 
The Cisco Embedded Wireless Controller on Catalyst Access Points comes with a limited lifetime warranty that provides full warranty coverage of the hardware for as long as the original end user continues to own or use the product. 
The warranty includes 10-day advance hardware replacement and ensures that software media are defect-free for 90 days.
 For more details 
Your embedded software is subject to the Cisco End User License Agreement (EULA) (link available below) 
and/or any Supplemental EULA (SEULA) or specific software warranty terms for additional software products loaded on the device.

Security
Rogue detection  classification  and containment
802.1X supplicant support on EWC-AP
Walled garden and DNS ACLs

Management
Cisco DNA Center for Automation and Assurance
Dashboard (web browser) and easy-to-use mobile app for deploying  provisioning  and monitoring
Standards-based interoperability tools using programmable interfaces
Open standards-based programmability with NETCONF and YANG

Guest
Central web authentication  local web authentication  and BYOD
Cisco DNA Spaces integration for personalized and relevant guest experience
Cisco SF350 48 Port Managed Switch dealers in hyderabad, andhra, nellore, vizag, bangalore, telangana, kerala, bangalore, chennai, india

Cisco SF350 48 Port Managed Switch

  • Brand : Cisco Systems, Inc.
  • Series : 350
  • Model : SF350-48-K9-NA
  • Format : Desktop
  • Network Management Type : Ethernet Switch
  • Uplink Ports: Yes
  • Uplink Interface : SFP
  • Primary Ports : 48 x Fast Ethernet Network Fast Ethernet Gigabit Ethernet 2 x Gigabit Ethernet Expansion Slot 4 x Gigabit Ethernet Network
  • Primary Port Speed: 10/100Base-TX 1000Base-X 10/100/1000Base-TX
  • Data Transmission Speed :  SFP
  • Weight : 10.4
Cisco SF350 48 Port PoE Managed Switch dealers in hyderabad, andhra, nellore, vizag, bangalore, telangana, kerala, bangalore, chennai, india

Cisco SF350 48 Port PoE Managed Switch

  • Brand : Cisco Systems, Inc.
  • Series : 350
  • Model : SF350-48P-K9-NA
  • Format : Desktop
  • Network Management Type : Ethernet Switch
  • Uplink Ports : Yes
  • Uplink Interface : SFP
  • Primary Ports : 48 x Fast Ethernet Network Fast Ethernet 4 x Gigabit Ethernet Expansion Slot Gigabit Ethernet 2 x Gigabit Ethernet Network
  • Primary Port Speed : 10/100Base-TX 1000Base-X 10/100/1000Base-TX
  • Data Transmission Uplink Speed : SFP
  • Weight : 15.9
Cisco SF350 48MP Port 10 100 PoE Managed Switch dealers in hyderabad, andhra, nellore, vizag, bangalore, telangana, kerala, bangalore, chennai, india

Cisco SF350 48MP Port 10 100 PoE Managed Switch

  • Brand : Cisco Systems, Inc.
  • Series : 350
  • Model : SF350-48MP-K9-NA
  • Format : Desktop
  • Network Management Type : Ethernet Switch
  • Uplink Ports : Yes
  • Uplink Interface : SFP
  • Primary Ports : 48 x Fast Ethernet Network Fast Ethernet Gigabit Ethernet 4 x Gigabit Ethernet Expansion Slot 2 x Gigabit Ethernet Network
  • Primary Port Speed : 10/100Base-TX 1000Base-X 10/100/1000Base-TX
  • Data Transmission Uplink Speed : SFP
  • Weight : 16.2
  • Model : SF350-48MP
Cisco Nexus 9236C Switch dealers in hyderabad, andhra, nellore, vizag, bangalore, telangana, kerala, bangalore, chennai, india

Cisco Nexus 9236C Switch

Part Number N9K-C92160YC-X
Ports : 48 x 10- and 25-Gbps SFP+ and 6 QSFP+ ports (4 are 100-Gbps capable)
Supported speeds :1, 10, and 25 Gbps on SFP+ ports
10, 25, 40, and 100 Gbps on QSFP+ ports
Port configuration :48 x 10/25-Gbps ports for downlinks; 4 of the 6 uplink ports are 100-Gbps capable. Ports 50 and 52 can be
individually configured into 1 x 100 Gbps, 4 x 10 Gbps, 4 x 25 Gbps, 1 x 40 Gbps, or 2 x 50 Gbps
CPU :2 cores
System memory : 16G
SSD drive :24G
Shared system buffer :20MB
Management ports 2 ports: 1 RJ-45 and 1SFP
USB ports 1
RS-232 serial ports :  1
Power supplies (up to 2) :650W AC, 930W DC, or 1200W AC/HVDC
Physical dimensions :(H x W x D)
1.72 x 17.3 x 22.5 in. (4.4 x 43.9 x 57.1 cm)
Weight (without power supplies or fans)
14.12 lb (6.4 kg)

(1) Power Supply 
(2) 4 x Fan Module 
(3) Power Supply
(4) Out-of-band management port (RJ-45 port)
(5) Chassis LEDs (Beacon [BCN] and Status [STS])
(6) USB port used for saving or copying functions 
(7) Out-of-band management port (SFP port)
(8) Console port (RS232 port)
Cisco Nexus 92160YC X Switch dealers in hyderabad, andhra, nellore, vizag, bangalore, telangana, kerala, bangalore, chennai, india

Cisco Nexus 92160YC X Switch

N9K-C92160YC-X is one of the Cisco Nexus 9200 switches. 92160YC-X Switch is optimized for Cisco NX-OS deployments. It provides 48 1/10/25-
Gb host ports and up to six hybrid uplink ports that can be configured as 10, 25, 40, or 100-Gb ports. With 3.2 Tbps of switching capacity, the
92160YC-X delivers line-rate Layer 2 and 3 features for demanding enterprise, service provider hosting, and cloud computing environments.
Cisco Nexus 92304QC Switch dealers in hyderabad, andhra, nellore, vizag, bangalore, telangana, kerala, bangalore, chennai, india

Cisco Nexus 92304QC Switch

  • The Cisco Nexus 92304QC switch (N9K-C92304QC) is a 2-RU switch with the following ports:
  • 56 fixed 40-Gigabit QSFP+ (optical) interface ports supporting 1-, 10-, and 40-Gigabit speeds
  • 16 of these ports support breakout cables for connections to 64 1- and 10-Gigabit ports on other devices.
  • 8 QSFP28 ports supporting 40- and 100-Gigabit speeds
  • 1 console port
  • 1 management port
  • 2 software-defined ports (labeled as S1-65 and S1-66)
  • 1 USB port
Cisco Nexus 93360YC FX2 Switch dealers in hyderabad, andhra, nellore, vizag, bangalore, telangana, kerala, bangalore, chennai, india

Cisco Nexus 93360YC FX2 Switch

  • The Cisco Nexus 93360YC-FX2 Leaf Switch is a 2-Rack-Unit (2RU) Leaf switch that supports 7.2 Tbps of bandwidth and 2.8 bpps across 96 fixed 10/25G SFP+ ports and 12 fixed 40/10G QSFP28 ports. The 96 ports of downlinks support 1/10/25-Gbps. The 12 uplinks ports can be configured as 40- and 100-Gbps ports, offering flexible migration options. The switch is ideal for a non-oversubscribed solution in a compact form factor. The switch has FC-FEC and RS-FEC enabled for 25Gbps support over longer distances.
  • Main Features
  • FX2
  • Switch
  • L3
  • managed
  • 96 x 1/10/25 Gigabit SFP+ + 12 x 40/100 Gigabit QSFP28
  • rack-mountable
  • Built-in Devices :128 GB SSD
  • Installed Size :16 GB
  • Capacity :SPAN sessions: 4, Port channels: 512, VLANs supported: 3967, NAT entries: 1023, HSRP groups: 490, Longest prefix match (LPM) routes: 896000, Multicast routes: 32000, ACL entries (ingress): 5000, MST instances: 64, ECMP paths: 64, IP host entries: 896000, ACL entries (egress): 2000, MAC addresses: 256000, Rapid Per-VLAN Spanning Tree Plus instances: 3967
  • Form Factor :Rack-mountable
  • Ports Qty :96
  • Advanced Switching :Layer 3
  • Routing Protocol :ECMP, RSVP, BGP, PIM-SM, MSDP, OSPF, EIGRP, RIP, RIP-2, Multiprotocol BGP, HSRP, MPLS
  • Manageable :Yes
  • Status Indicators :Status
  • Features :Layer 3 switching, Open Shortest Path First (OSPF), 3 fans, Port-side exhaust (PSE), Multicast Source Discovery Protocol (MSDP), MPLS support, Virtual Extensible LAN (VXLAN), MACsec support, Source-Specific Multicast (SSM), Access Control List (ACL) support, Virtual PortChannel (vPC) technology, 40MB system buffer, Spanning Tree Protocol (STP) support, Power On Auto Provisioning (POAP), Ethernet Virtual Private Network (EVPN), Multiple Spanning Tree Protocol (MSTP) support
  • Interfaces :1 x management SFP+, 12 x 100Gbit/40Gbit LAN QSFP28, 96 x 1/10/25Gbit LAN SFP+, 1 x serial (RS-232), 1 x USB, 1 x management RJ-45
  • Ports Type :40/100 Gigabit QSFP28
  • Dimensions & Weight
  • Width :17.4 inch
  • Depth :22.9 inch
  • Height :3.4 inch
Cisco Nexus 9336C FX2 Switch dealers in hyderabad, andhra, nellore, vizag, bangalore, telangana, kerala, bangalore, chennai, india

Cisco Nexus 9336C FX2 Switch

  • The Cisco Nexus 9336C-FX2 offers flexible port speeds in a compact form factor. Designed to meet the changing needs of data centers, big data applications, and automated cloud environments, this powerful switch delivers superior programmability.
  • Main Features : 
  • FX2
  • Switch
  • L3
  • managed
  • 36 x 100 Gigabit QSFP28 / 40 Gigabit QSFP28
  • rack-mountable
  • Built-in Devices :128 GB SSD
  • Installed Size :24 GB
  • Performance :Bandwidth: 2.8 bpps, Bandwidth: 7.2 Tbps
  • Features :Ethernet Virtual Private Network (EVPN), Port exhaust, 40MB system buffer, Spanning Tree Protocol (STP) support, Virtual PortChannel (vPC) technology, Multiple Spanning Tree Protocol (MSTP) support, Power On Auto Provisioning (POAP), 3 fan trays, Side intake airflow, Virtual Extensible LAN (VXLAN), Source-Specific Multicast (SSM), Access Control List (ACL) support, MACsec support
  • Type :100 Gigabit QSFP28 / 40 Gigabit QSFP28
  • Interfaces :1 x management RJ-45, 1 x USB, 36 x 100Gbit/40Gbit LAN QSFP28, 1 x management SFP+, 1 x serial (RS-232)
  • Type :Internal power supply
  • Power Redundancy :Optional
  • Installed Qty :0
  • Max Supported Qty :2
  • Nominal Voltage :AC 120/230 V
  • Frequency Required :50/60 hertz
  • Power Consumption Operational :777 watt
  • Dimensions & Weight
  • Width :17.3 inch
  • Depth :24.5 inch
  • Height :1.7 inch
  • Weight :18.74 lbs
Cisco Nexus 93240YC FX2 Switch dealers in hyderabad, andhra, nellore, vizag, bangalore, telangana, kerala, bangalore, chennai, india

Cisco Nexus 93240YC FX2 Switch

  • Architectural flexibility : 
  • Support for Cisco ACI architecture and NX-OS
  • 48 x 1/10/25 Gbps fiber ports
  • 12 x 40/100 Gbps QSFP28 ports
  • Supports 4.8 Tbps of bandwidth and over 1.8 bpps
  • Rich features : 
  • Automated, policy-based systems management with Cisco ACI
  • Build programmable SDN fabrics leveraging open APIs and over 65 Cisco ACI global technology partners
  • Enhanced Cisco NX-OS Software designed for performance, resiliency, scalability, manageability, and programmability
  • Real-time buffer utilization per port and per queue, for monitoring traffic micro-bursts and application traffic patterns
  • Highly available and efficient design : 
  • High-performance, Layer 2 and 3 non-blocking architecture
  • Easily deployed into either a hot-aisle or cold-aisle configuration
  • Redundant, hot-swappable power supplies and fan trays
  • Specifications at a Glance : 
  • Powered by cloud-scale technology
  • 48 x 1/10/25 Gbps fiber ports
  • 12 x 40/100 Gbps QSFP28 ports
  • 40 MB buffer
  • Up to 4.8 Tbps of bandwidth
Cisco Nexus 9348GC FXP Switch dealers in hyderabad, andhra, nellore, vizag, bangalore, telangana, kerala, bangalore, chennai, india

Cisco Nexus 9348GC FXP Switch

  • The Cisco Nexus 9348GC-FXP Switch is a 1RU switch that supports 696 Gbps of bandwidth and over 250 mpps. The 48 1GBASE-T downlink ports on the switch can be configured to work as 100-Mbps, 1-Gbps ports. The 4 ports of SFP28 can be configured as 1/10/25-Gbps and the 2 ports of QSFP28 can be configured as 40- and 100-Gbps ports.
  • Cisco Nexus 9348GC-FXP Switch is designed to meet the changing needs of data centers, big data applications, and automated cloud environments.
  • Highlights points: 
  • Powered by Cisco Cloud Scale ASIC technology
  • Support for Cisco NX OS Software and Cisco ACI (Application Centric Infrastructure) architecture
  • High-performance, Layer 2 and 3 non-blocking architecture
  • Easily deployed into either a hot-aisle or cold-aisle configuration
  • Cisco Tetration Analytics Platform support with built-in hardware sensors for rich traffic flow telemetry and line-rate data collection
  • Cisco Nexus Data Broker support for network traffic monitoring and analysis
  • Robust hardware system specifications feature 4-core CPU, 24 GB of system memory, and respectively 128-GB SSD drive
  • The 40-MB buffer supporting highly scalable data centers and big data applications 696 Gbps of bandwidth and over 250 mpps
  • Fixed downlinks with 48 x FE/GE
  • Fixed uplinks with 4 x 25GE SFP28, 2 x 100GE QSFP28
Cisco Nexus 9364C Switch dealers in hyderabad, andhra, nellore, vizag, bangalore, telangana, kerala, bangalore, chennai, india

Cisco Nexus 9364C Switch

Physical : 64-port 40/100G QSFP28 ports & 2-port 1/10G SFP+ ports
1200 watt (W) AC power supplies or 930W DC power supplies (up to 2)
Hot-swappable, dual fan trays with redundant fans
System memory: 32GB
SSD: 256GB
USB: 1 port
RS-232 serial console ports: 1
(1) 1-/10-Gigabit SFP+ ports (2)
(2) 40-/100-Gigabit QSFP28 ports (ports 1 to 48 in 4 rows of 12 ports)
(3) Green colored 40-/100-Gigabit QSFP28 ports supporting MACsec (when software support is available) (ports 49 to 64 in 4 rows of 4 ports)
(4) Fan modules (3) with slots numbered from 1 (left) to 3 (right)
(5) USB port (1)
(6) Management port (1—SFP optical port)
(7) Management port (1—RJ-45 copper port)
(8) Power supply modules (1 or 2) (AC power supplies shown) with slots numbered 1 (top) and 2 (bottom)
(9) Console port (1)

Management ports:
2 (1 x 10/100/1000BASE-T and 1 x 1-Gbps SFP+)
Broadwell-DE CPU: 4 cores
Physical (H x W x D) 3.38 x 17.37 x 22.27 in. (8.59 x 44.13 x 56.58 cm)
Weight (chassis) 36.9lb (16.74kg) with power supplies and fans, 27.4 lb (12.43kg) without power supplies and fans
Cisco Nexus 9332C Switch dealers in hyderabad, andhra, nellore, vizag, bangalore, telangana, kerala, bangalore, chennai, india

Cisco Nexus 9332C Switch

  • Ports :32 QSFP+ ports
  • Supported speeds :40 Gigabit Ethernet speeds
  • Physical: (H x W x D) 1.72 x 17.3 x 22.5 in. (4.4 x 43.9 x 57.1 cm)
  • Weight 22 lb (10.0 kg) (without power supplies or fans)
  • Predictable highperformance : 
  • Latency of 1 to 2 microseconds with up to 1.28 Tbps of bandwidth enables customers to build a robust switch fabric scaling
  • from as few as 200 10-Gbps server ports to more than 200,000 10-Gbps server ports.
  • Increased integrated buffer space : 
  • Up to a total of 50 MB of integrated shared buffer space allows better management of speed mismatch between access and
  • uplink ports.
  • Designed for availability : 
  • Hot-swappable, redundant power supplies and fan trays increase availability.
  • Flexible airflow configuration: 
  • Port-side intake and port-side exhaust airflow configurations are both supported.
  • CPU, SSD,and memory : 
  • Dual-core 2.5-GHz x86 CPUs with 64-GB SSD drive and 16 GB of memory provide enhanced network performance.
  • Power efficiency : 
  • All Cisco Nexus 9000 Series power supplies are 80 Plus Platinum rated.
  • Advanced optics : 
  • Cisco offers a pluggable 40 Gigabit Ethernet QSFP+ transceiver that enables customers to use existing 10 Gigabit Ethernet
  • data center cabling to support 40 Gigabit Ethernet connectivity. This technology facilitates adoption of 40 Gigabit Ethernet
  • with no cable infrastructure upgrade cost.
Cisco Nexus 9332PQ Switch dealers in hyderabad, andhra, nellore, vizag, bangalore, telangana, kerala, bangalore, chennai, india

Cisco Nexus 9332PQ Switch

  • Ports :32 QSFP+ ports
  • Supported speeds :40 Gigabit Ethernet speeds
  • Physical: (H x W x D) 1.72 x 17.3 x 22.5 in. (4.4 x 43.9 x 57.1 cm)
  • Weight 22 lb (10.0 kg) (without power supplies or fans)
  • Predictable highperformance : 
  • Latency of 1 to 2 microseconds with up to 1.28 Tbps of bandwidth enables customers to build a robust switch fabric scaling
  • from as few as 200 10-Gbps server ports to more than 200,000 10-Gbps server ports.
  • Increased integrated buffer space : 
  • Up to a total of 50 MB of integrated shared buffer space allows better management of speed mismatch between access and
  • uplink ports.
  • Designed for availability : 
  • Hot-swappable, redundant power supplies and fan trays increase availability.
  • Flexible airflow configuration: 
  • Port-side intake and port-side exhaust airflow configurations are both supported.
  • CPU, SSD,and memory : 
  • Dual-core 2.5-GHz x86 CPUs with 64-GB SSD drive and 16 GB of memory provide enhanced network performance.
  • Power efficiency : 
  • All Cisco Nexus 9000 Series power supplies are 80 Plus Platinum rated.
  • Advanced optics : 
  • Cisco offers a pluggable 40 Gigabit Ethernet QSFP+ transceiver that enables customers to use existing 10 Gigabit Ethernet
  • data center cabling to support 40 Gigabit Ethernet connectivity. This technology facilitates adoption of 40 Gigabit Ethernet
  • with no cable infrastructure upgrade cost
Cisco Nexus 9336PQ ACI Spine Switch dealers in hyderabad, andhra, nellore, vizag, bangalore, telangana, kerala, bangalore, chennai, india

Cisco Nexus 9336PQ ACI Spine Switch

  • Device Type : Switch - 36 ports - L3 - managed
  • Enclosure Type : Desktop, rack-mountable 2U
  • Subtype : 40 Gigabit Ethernet
  • Ports : 36 x 40 Gigabit QSFP+
  • Performance : Bandwidth: 1.44 Tbps
  • Capacity : Longest prefix match (LPM) entries (IPv4): 16000 ¦ Host table entries (IPv4): 88000 ¦ MAC addresses: 160000 ¦ IPv4 routes (Multicast): 32000 ¦ Virtual interfaces (VLANs): 4096 ¦ Equal-Cost Multipathing (ECMP) ways: 64 ¦ Multiple Spanning Tree Protocol instances: 64 ¦ Rapid Per-VLAN Spanning Tree Plus instances: 507 ¦ Virtual Routing and Forwarding (VRF) entries: 1000 ¦ IGMP snooping entries: 32000
  • Jumbo Frame Support : Yes
  • Routing Protocol : IS-IS, BGP, EIGRP, HSRP, VRRP, OSPFv2, PIM-SM, OSPFv3, MSDP, static IPv4 routing, ECMP, Bidirectional Forwarding Detection (BFD), VRRPv3
  • Remote Management Protocol :SNMP 1, SNMP 2, RMON, Telnet, SNMP 3, SSH-2
  • Authentication Method : 
  • RADIUS, PAP, CHAP, TACACS+, MS-CHAP, MS-CHAP v.2
  • Features : 
  • Flow control, modular design, load balancing, VLAN support, IGMP snooping, Syslog support, Weighted Round Robin (WRR) queuing, Broadcast Storm Control, Multicast Storm Control, Unicast Storm Control, Weighted Random Early Detection (WRED), Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, Access Control List (ACL) support, Quality of Service (QoS), RADIUS support, RDMA support, Virtual Route Forwarding-Lite (VRF-Lite), Uni-Directional Link Detection (UDLD), Rapid Per-VLAN Spanning Tree Plus (PVRST+), LLDP support, DHCP relay, Link Aggregation Control Protocol (LACP), Virtual Routing and Forwarding (VRF), Class of Service (CoS), DiffServ Code Point (DSCP) support
  • Compliant Standards : 
  • IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.3ae, IEEE 802.1s, IEEE 801.1p, IEEE 802.1ab (LLDP), IEEE 802.3ba
Cisco Nexus 93108TC FX Switch dealers in hyderabad, andhra, nellore, vizag, bangalore, telangana, kerala, bangalore, chennai, india

Cisco Nexus 93108TC FX Switch

  • Product Type :  Ethernet Switch
  • Interfaces/Ports
  • Total Number of Network Ports :  48
  • Uplink Port :  Yes
  • Modular  : Yes
  • Stack Port : No
  • Port/Expansion Slot Details : 48 x 10 Gigabit Ethernet Network
  • Port/Expansion Slot Details :6 x 100 Gigabit Ethernet Expansion Slot
  • Media & Performance
  • Media Type Supported Optical Fiber
  • Media Type Supported Twisted Pair
  • Ethernet Technology 100 Gigabit Ethernet
  • Ethernet Technology 10 Gigabit Ethernet
  • Network Technology 100GBase-X
  • Network Technology 10GBase-T
  • I/O Expansions
  • Number of Total Expansion Slots  : 6
  • Expansion Slot Type :QSFP28
  • Shared SFP Slot :No
  • Network & Communication : 
  • Layer Supported :  3
  • Management & Protocols
  • Manageable  : Yes
  • Power Description : 
  • Power Source Power Supply
  • Redundant Power Supply Supported  : Yes
Cisco Nexus 93108TC EX Switch dealers in hyderabad, andhra, nellore, vizag, bangalore, telangana, kerala, bangalore, chennai, india

Cisco Nexus 93108TC EX Switch

  • N9K-C93108TC-EX is one of the Cisco Nexus 9300-EX switches. Cisco Nexus 9300-EX platforms are the next generation of fixed Cisco Nexus
  • 9000 Series Switches. The new platforms support cost-effective cloud-scale deployments, an increased number of endpoints, and cloud services
  • with wire-rate security and telemetry. The platforms are built on modern system architecture designed to provide high performance and meet
  • the evolving needs of highly scalable data centers and growing enterprises.
  • Ports :  48 x 10GBASE-T and 6 x 40/100-Gbps QSFP28 ports
  • Downlink supported speeds :  100-Mbps and 1/10-Gbps speeds
  • CPU : 4 cores
  • System memory : 24 GB
  • SSD drive : 64 GB
  • System buffer  : 40 MB
  • Management ports 2 ports: 1 RJ-45 and 1 SFP
  • USB ports  : 1
  • RS-232 serial ports : 1
  • Power supplies (up to 2) :  650W AC, 930W DC, or 1200W HVAC/HVDC
  • Typical power (AC/DC) :  290W
  • Maximum power (AC/DC) : 499W
  • Physical dimensions
  • (H x W x D)
  • 1.72 x 17.3 x 22.5 in.
  • (4.4 x 43.9 x 57.1 cm)
  • Weight (without power supplies or fans) 17.7 lb (8.0 kg)
Cisco Nexus 93120TX Switch dealers in hyderabad, andhra, nellore, vizag, bangalore, telangana, kerala, bangalore, chennai, india

Cisco Nexus 93120TX Switch

  • Ports : 96 fixed 1/10GBASE-T and 6 QSFP+ ports
  • Supported speeds :100 Megabit Ethernet and 1/10 Gigabit Ethernet speeds
  • 40 Gigabit Ethernet uplink
  • ports : 6 fixed QSFP+ ports
  • Physical (H x W x D) 3.5 x 17.5 x 22.5 in. (8.9 x 44.5 x 57.1 cm)
  • Weight 26 lb (11.8 kg) (without power supplies, fans, or uplink module)
  • Predictable high performance : 
  • Latency of 1 to 2 microseconds with up to 1.28 Tbps of bandwidth enables customers to build a robust switch fabric scaling
  • from as few as 200 10-Gbps server ports to more than 200,000 10-Gbps server ports.
  • Increased integrated buffer space : 
  • Up to a total of 50 MB of integrated shared buffer space allows better management of speed mismatch between access and
  • uplink ports.
  • Designed for availability : 
  • Hot-swappable, redundant power supplies and fan trays increase availability.
  • Flexible airflow configuration :
  • Port-side intake and port-side exhaust airflow configurations are both supported.
  • CPU, SSD, and memory : 
  • Dual-core 2.5-GHz x86 CPUs with 64-GB SSD drive and 16 GB of memory provide enhanced network performance.
  • Power efficiency : 
  • All Cisco Nexus 9000 Series power supplies are 80 Plus Platinum rated.
  • Advanced optics : 
  • Cisco offers a pluggable 40 Gigabit Ethernet QSFP+ transceiver that enables customers to use existing 10 Gigabit Ethernet
  • data center cabling to support 40 Gigabit Ethernet connectivity. This technology facilitates adoption of 40 Gigabit Ethernet
  • with no cable infrastructure upgrade cost.
CISCO 52 PORT GIGABIT MANAGED SWITCH (SG300 52P) dealers in hyderabad, andhra, nellore, vizag, bangalore, telangana, kerala, bangalore, chennai, india

CISCO 52 PORT GIGABIT MANAGED SWITCH (SG300 52P)

  • Brand:Cisco Small Business
  • Series:300 Series
  • Model:SRW2048-K9-NA
  • Format:Rackmount
  • Mac Address Table:8k
  • Network Managed Type:Managed
  • Dimensions:17.35 x 17.3 x 1.75 inch
  • Weight:8.62 lbs
CISCO AIRONET 2800I ACCESS POINT dealers in hyderabad, andhra, nellore, vizag, bangalore, telangana, kerala, bangalore, chennai, india

CISCO AIRONET 2800I ACCESS POINT

  • orm Factor:external
  • Type:Wireless access point
  • Connectivity Technology:wireless
  • Type:Wireless access point
  • Connectivity Technology:wireless
  • Data Link Protocol:IEEE 802.11a, IEEE 802.11ac Wave 2, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
  • Wireless Protocol:802.11a/b/g/n/ac Wave 2
  • Data Transfer Rate:5.2 Gbps
  • Wi-Fi Bands: 2.4 GHz, 5 GHz
  • Status Indicator:Boot state, error, status
CISCO AIRONET POWER INJECTOR AIR PWRINJ6 dealers in hyderabad, andhra, nellore, vizag, bangalore, telangana, kerala, bangalore, chennai, india

CISCO AIRONET POWER INJECTOR AIR PWRINJ6

  • Subcategory: power converters, splitters and accessories
  • Manufacturer:Cisco
  • Form Factor:external
  • Product Line:Cisco Aironet
  • Model:Power Injector
CISCO SF350 48MP 48 PORT 10 100 POE MANAGED SWITCH dealers in hyderabad, andhra, nellore, vizag, bangalore, telangana, kerala, bangalore, chennai, india

CISCO SF350 48MP 48 PORT 10 100 POE MANAGED SWITCH

  • Brand : Cisco Systems, Inc.
  • Series : 350
  • Model : SF350-48MP-K9-NA
  • Format : Desktop
  • Network Management Type : Ethernet Switch
  • Uplink Ports : Yes
  • Uplink Interface : SFP
  • Primary Ports : 48 x Fast Ethernet Network Fast Ethernet Gigabit Ethernet 4 x Gigabit Ethernet Expansion Slot 2 x Gigabit Ethernet Network
  • Primary Port Speed : 10/100Base-TX 1000Base-X 10/100/1000Base-TX
  • Data Transmission Uplink Speed : SFP
  • Weight : 16.2
  • Model : SF350-48MP
Cisco Nexus 93180YC FX Switch dealers in hyderabad, andhra, nellore, vizag, bangalore, telangana, kerala, bangalore, chennai, india

Cisco Nexus 93180YC FX Switch

  • Device Type    : Switch - 48 ports - L3 - Managed
  • Enclosure Type     :Rack-mountable 1U
  • Subtype    :25 Gigabit Ethernet / 32Gb Fibre Channel
  • Ports    :48 x 1/10/25 Gigabit Ethernet / 8/16/32Gb Fiber Channel / FCoE SFP+ + 6 x 40/100 Gigabit QSFP28 / FCoE
  • Performance    :Bandwidth: 3.6 Tbps
  • Active SPAN sessions: 4
  • Capacity:     Multiple Spanning Tree Protocol instances: 64
  • HSRP groups: 490
  • Per VLAN Rapid Spanning Tree instances: 4000
  • Maximum number of links in a port channel: 32
  • Maximum number of port channels: 512
  • ECMP paths: 64
  • Virtual Routing and Forwarding (VRF) instances: 16000
  • VLANs supported: 4096
  • ACL entries (egress): 2000
  • IGMP snooping groups: 32000
  • Multicast routes: 32000
  • Latency: < 1 µs
  • MAC Address Table Size : 512K entries
  • Routing Protocol    : OSPF, RIP, RIP-2, BGP, EIGRP, HSRP, PIM-SM, MSDP, ECMP, MPLS
  • Features:    Spanning Tree Protocol (STP) support, Multiple Spanning Tree Protocol (MSTP) support, Access Control List (ACL) support, Virtual PortChannel (vPC) technology, MACsec support, 4 fans, Virtual Extensible LAN (VXLAN), Source-Specific Multicast (SSM), Ethernet Virtual Private Network (EVPN), 40MB system buffer, Power On Auto Provisioning (POAP)
  • Compliant Standards :     IEEE 802.1ae
  • RAM :    64 GB
  • Built-in Devices : 128 GB SSD
  • Interfaces    48 x 1/10/25Gbit LAN / 8/16/32Gb Fibre Channel SFP+ downlink
  • 6 x 100Gbit/40Gbit LAN QSFP28 uplink
  • 1 x management RJ-45
  • 1 x USB
  • 1 x serial (RS-232)
Cisco 6300 Series Embedded Services Access Points dealers in hyderabad, andhra, nellore, vizag, bangalore, telangana, kerala, bangalore, chennai, india

Cisco 6300 Series Embedded Services Access Points

Embed resilient Cisco WiFi into your hardware.
Extend intent-based networking to your solutions .
IOx support for intelligence at the edge.
Cisco DNA Assurance for worry-free network management.

Radio type
2.4 GHz: 802.11b/g/n  2x2 MIMO  2 spatial streams
5 GHz: 802.11a/n/ac  2x2 MIMO  2 spatial streams

802.11ac Wave 2 capabilities
 2x2 MIMO with two spatial streams
  Multi- and single-user MIMO
  Maximal-Ratio Combining (MRC)
  802.11ac beamforming (transmit beamforming)
  20- 40- and 80-MHz channels
  PHY data rates up to 867 Mbps (80-MHz bandwidth in 5 GHz)
  Packet aggregation: A-MPDU (Tx/Rx) and A-MSDU (Tx/Rx)
  802.11 Dynamic Frequency Selection (DFS)
  Cyclic Shift Diversity (CSD) support

802.11n Version 2.0 (and related) capabilities
  2x2 MIMO with two spatial streams
  Maximal-Ratio Combining (MRC)
  20- and 40-MHz channels
  PHY data rates up to 300 Mbps (40-MHz bandwidth in 5 GHz)
  Packet aggregation: A-MPDU (Tx/Rx) and A-MSDU (Tx/Rx)
  802.11 Dynamic Frequency Selection (DFS)
 Cyclic Shift Diversity (CSD) support

Data rates supported
2.4-GHz radio:
802.11b: 1  2  5.5  11 Mbps
802.11g: 6  9  12  18  24  36  48  54 Mbps
802.11n data rates:

Interfaces
 x1 10/100/1000BASE-T auto-sensing PoE+ in (802.3at)Cisco Universal Power over Ethernet (UPOE) in
  x2 10/100/1000BASE-T auto-sensing PoE out (802.3af) PoE+ out (802.3at)
  x1 fiber SFP (fiber or electrical)
  Management console port (RJ-45)
  USB 3.0 port
  Multicolor system LED  port LED
  DC power input
  Reset button

Uplink options
Ethernet  SFP  and wireless mesh

Antennas :Dual band

PoE output : 35.3 W total
Maximum 30W per PSE port

USB interface 
USB 2.0 / USB 3.0 supported

Dimensions (H x W x L)
8.5 in. x 7.55 in. x 1.9 in.

Weight
3.1 lbs.

Warranty
1 year
Cisco Catalyst IW6300 Heavy Duty Series Access Points dealers in hyderabad, andhra, nellore, vizag, bangalore, telangana, kerala, bangalore, chennai, india

Cisco Catalyst IW6300 Heavy Duty Series Access Points

Designed for Class I Division 2 hazardous locations
Intelligence with intent-based networking to the IoT Edge and IOx support
Partner IoT modules for WirelessHART  ISA100
Cisco DNA Assurance for network management
802.11ac Wave 1 and 2 capabilities

 2x2 MIMO with two spatial streams
 Multi- and single-user MIMO
 Maximal-Ratio Combining (MRC)
  802.11ac beamforming (transmit beamforming)
  20- 40- and 80-MHz channels
  PHY data rates up to 867 Mbps (80-MHz bandwidth in 5 GHz)
  Packet aggregation: A-MPDU (Tx/Rx) and A-MSDU (Tx/Rx)
  802.11 Dynamic Frequency Selection (DFS)
  Cyclic Shift Diversity (CSD) support
 

802.11n Version 2.0 (and related) capabilities
  2x2 MIMO with two spatial streams
  Maximal-Ratio Combining (MRC)
  20- and 40-MHz channels
  PHY data rates up to 300 Mbps (40-MHz bandwidth in 5 GHz)
  Packet aggregation: A-MPDU (Tx/Rx) and A-MSDU (Tx/Rx)
  802.11 Dynamic Frequency Selection (DFS)
  Cyclic Shift Diversity (CSD) support
 

Data rates supported
2.4-GHz radio:
802.11b: 1  2  5.5  11 Mbps
802.11g: 6  9  12  18  24  36  48  54 Mbps
802.11n data rates:

Interfaces
 x1 10/100/1000BASE-T autosensing PoE+ In (802.3at)UPOE in
  x2 10/100/1000BASE-T autosensing PoE Out (802.3af) PoE+ out (802.3at)
  x1 fiber SFP (fiber or electrical)
  Management console port (RJ-45)
  USB3.0 port
  Multicolor system LED  port LED
  DC power input (IW-6300H-DC-X-K9  IW-6300H-DCW-X-K9)
  AC power input (IW-6300H-AC-X-K9)
  Reset button

Uplink options
Ethernet  SFP  and wireless mesh

Dimensions (W x L x H)
IW-6300H-DC-X-K9: 9.7" x 11" x 3.8"
IW-6300H-DCW-X-K9: 9.7" x 11" x 5.6"
IW-6300H-AC-X-K9: 9.7" x 11" x 5.6"

Weight
13.3 lbs (IW-6300H-AC-X-K9), 9.8 lbs (IW-6300H-DC-X-K9),
12.7 lbs (IW-6300H-DCW-X-K9)

Warranty
1 year

IW 6300 Series
  IW-6300H-DC-X-K9: Dual-band 802.11a/g/n/ac  Wave 2  external antennas  44-57VDC/POE+/UPOE power input
  IW-6300H-DCW-X-K9: Dual-band 802.11a/g/n/ac  Wave 2  external antennas  10.8-36VDC/POE+/UPOE power input
  IW-6300H-AC-X-K9: Dual-band 802.11a/g/n/ac  Wave 2  external antennas  110-220VAC/POE+/UPOE power input